What did you do TO your F-150 today? 🙋🏻‍♂️

[Mauimaikai]

I believe in order to utilize any parking mode, any dash cam will need to be hard wired to the fuse box.

I'm not sure about that brand, but other brands do offer a power supply through the OBDII port as well making the process much simpler for parking/sentry mode

Sponsored

 

[DLav8r]

Husky wheel well liners. Had OEM on my truck I just sold. I liked them, but decided to give these a try for the price. Really like the quality out of the box. Fast install and seem to have more coverage area for protection vs the Ford. Alignment was perfect, felt like an OEM part. Why these dont come std on a 76k msrp truck…well, I digress

 

[DLav8r]

So here are the mods that were done when I picked it up. Pretty happy with how it turned out. I haven’t had a lot of driving time due to going on vacation the day after delivery, but I’m getting around 24-25mpg in town so far. Very pleased and I’ve been getting on it here and there for break in.

Formula 1 ceramic tint all around 15% rear, 5% fronts. Air blue 80 ceramic on windshield

2” ready lift level

Toyo OC AT3 275/60/20 SL (wanted stock size for max efficiency , same weight as Hanooks)

Line X premium

Undercover flex armor tonneau cover

added shorty antenna and will install fake noise bypass module this weekend.

 

[nsbreeding]

Husky wheel well liners. Had OEM on my truck I just sold. I liked them, but decided to give these a try for the price. Really like the quality out of the box. Fast install and seem to have more coverage area for protection vs the Ford. Alignment was perfect, felt like an OEM part. Why these dont come std on a 76k msrp truck…well, I digress

I agree, my SR5 06 Tundra had them, I figured it was standard on some of the higher packages? So I was surprised they weren't on my Lariat as well.

 

[Blackout150]

So here are the mods that were done when I picked it up. Pretty happy with how it turned out. I haven’t had a lot of driving time due to going on vacation the day after delivery, but I’m getting around 24-25mpg in town so far. Very pleased and I’ve been getting on it here and there for break in.

Formula 1 ceramic tint all around 15% rear, 5% fronts. Air blue 80 ceramic on windshield

2” ready lift level
Looks great. What’s your payload on that build if you don’t mine me asking. I have a similar build
Toyo OC AT3 275/60/20 SL (wanted stock size for max efficiency , same weight as Hanooks)

Line X premium

Undercover flex armor tonneau cover

added shorty antenna and will install fake noise bypass module this weekend.

 

[Jaysonics]

So here are the mods that were done when I picked it up. Pretty happy with how it turned out. I haven’t had a lot of driving time due to going on vacation the day after delivery, but I’m getting around 24-25mpg in town so far. Very pleased and I’ve been getting on it here and there for break in.

Formula 1 ceramic tint all around 15% rear, 5% fronts. Air blue 80 ceramic on windshield

2” ready lift level

Toyo OC AT3 275/60/20 SL (wanted stock size for max efficiency , same weight as Hanooks)

Line X premium

Undercover flex armor tonneau cover

added shorty antenna and will install fake noise bypass module this weekend.

Looks perfect! Have those same tires on order for my XLT whenever it arrives

 

[SuperRaptor]

So here are the mods that were done when I picked it up. Pretty happy with how it turned out. I haven’t had a lot of driving time due to going on vacation the day after delivery, but I’m getting around 24-25mpg in town so far. Very pleased and I’ve been getting on it here and there for break in.

Formula 1 ceramic tint all around 15% rear, 5% fronts. Air blue 80 ceramic on windshield

2” ready lift level

Toyo OC AT3 275/60/20 SL (wanted stock size for max efficiency , same weight as Hanooks)

Line X premium

Undercover flex armor tonneau cover

added shorty antenna and will install fake noise bypass module this weekend.

That looks really good, I got to get rid of these stock tires. Are they just as quiet as stock?

 

[mazeppa]

I have a 2022 101A XL with electric door locks that came with two 3-button fobs. I ordered two Strattec # 5923293 non-push button transponder keys and had them cut by a local locksmith. I programmed them using the method in the owner's manual in "PROGRAMMING THE REMOTE CONTROL - VEHICLES WITH: FLIP KEY".

I was not sure if these keys would program to my 2022 XL 101A:
1) These keys are only listed to work with 2015-2021 standard 100A XL F150s
2) Was not sure if the non-push button key would program to a push button fob F150

They WORKED! After programing they will start my F150 and unlock the doors manually. After the first key was programmed the center cluster gave me a 5-digit key code, after the second key was programmed there was not a key code message, so if you do this be ready to write down the code (for whatever it is good for?).

 

[DLav8r]

That looks really good, I got to get rid of these stock tires. Are they just as quiet as stock?

Thanks! Yes they are. My old 22 that I just sold for this truck had the Hanooks as I figured I’d be selling it when my PB order came in. I don’t notice any sound difference and the ride seems a bit smoother and “cushy” compared to the Hanooks. I’m at 37psi on them which Toyo recommended when I emailed them my specs. This truck is very quiet though compared to my 5.0L. I miss that v8 sound ha.

 

[SupraVu]

Installed a plow and got the truck washed

 

[Bird of prey]

Pics of said plow

 

[BritCanuck]

It was adding ‘black plastic’ things today.

Husky wheel liners, and the el-cheap o Ford mud flaps.

 

[Jaysonics]

Installed a plow and got the truck washed

Would be interested in seeing some pics of the setup. Also will be putting a plow on mine

 

[SupraVu]

Would be interested in seeing some pics of the setup. Also will be putting a plow on mine

Timbrens installed to prevent too much sagging. Drives like stock without the plow on as well

 

[Jaysonics]

Timbrens installed to prevent too much sagging. Drives like stock without the plow on as well

Much appreciated, looks good. Going with a fisher HT with a 1.5" level. How does the air dam look like with the push plates? I'm assuming the active air dam is no longer?

Sponsored