Would you be interested in this Light Bracket?

[Lricaud81]

I almost did that, you would have to use either a super cheap 12in bar or something like a rigid slim. I choose not to do that cause cheap lights suck and rigid is expensive for that small light.

Well thats just about my luck.

Sponsored

 

[SpaceWhiteF150]

Just finished the design v4, the lights are now centered and the bracket is easier to install!

 

[SpaceWhiteF150]

More pics on the way, will post install instructions and different ways that you can utilize the bracket. Would y’all want this raw? Trying to get in y’all’s hands for a reasonable price, but with anodizing it’s gets expensive fast! Would y’all be happy with raw aluminum? Hoping to have all the info to y’all in a couple weeks!

I’m trying to get my ducks in a row for possible sales. If your truly interested please text 936-788-3820. Send with name, year, engine, and brand of light you plan to run. I will compile this data and try to test. Then when I’m ready to place orders for brackets I will shot y’all a text to get final #’s!

Thanks

 

[SpaceWhiteF150]

First “final production” bracket arrives in the mail tomorrow!

 

[mxwrk]

Following!

 

[SpaceWhiteF150]

More to come!

If you run the factory plate you can still add 2 pods!

 

[JCM]

If you run the factory plate you can still add 2 pods!

This is one option I am considering rather than relocating the front plate.

 

[SpaceWhiteF150]

I have a busy weekend ahead so this is what I have for y’all. I’m planning to have install tips and tricks as well as pics of the different variations of setups by next weekend so that the week of the 19th I can open orders.

The plan is as follows, bracket will be 3/16 6061 T6 aluminum, with a low sheen wrinkle black paint. I leaning towards paint because it keeps cost down so that I can get these to y’all reasonably. I would like to be at least 20 brackets for the first order, this will allow the price to be substantially lower. Please post with any input or thoughts you might have.

Thanks, and have a wonderful weekend!

 

[SpaceWhiteF150]

Hold on the paint! Getting quotes!

 

[SpaceWhiteF150]

Brackets will be getting powder!

 

[SpaceWhiteF150]

You are not ready!

 

[mxwrk]

Looks slick!

 

[SpaceWhiteF150]

Install instructions other details and orders will open this weekend!

 

[SpaceWhiteF150]

Good news and bad news! All dimensions get the pods centered and they look absolutely badass. The bracket needs slight revision to help with install and add strength. With 5 pods on it, it is not to my liking. It’s probably strong enough but I don’t want to sell an inferior product. Also, got the powder sample, it turned out great! I will keep adding names for those who are interested but I’m not going to be taking orders quite yet.

Instructions are complete for 5.0 trucks, I was not able to get my hands on a 14th gen eco. So I’m going to have to ask y'all for some pics, if your happy to take some pics for me please send a private message.

If you would like your name to be added to the list please pm me!

Thanks,
Connor

*The bumper is not straight! Very short on time today!

60% gloss or matte black powder?

 

[SpaceWhiteF150]

For those wanting to run 5 pods, it is possible!

I ran out of time today to trim the ecoboost bezel, but from looking at the trim piece and all the push pins you can easily trim out the 2 center bars. Allowing you to cleanly run 5 pods!

Sponsored