What did you do TO your F-150 today? 🙋🏻‍♂️

[N1TJ]

Auto start stop delete

Was the install as easy as it looked and works with no issues? I already have one here waiting to throw on day 1!

Beautiful ride and some tasteful mods already, man!

Sponsored

 

[Kefoster2]

Sorry, I was busy putting and doing stuff to mine.

Front and rear molded Ford mudflaps.
Put my Bakfip bed cover that has been 3 of my F150s now.
Put my old swing storage on, fit and went on just like it did on my 2018
Switched tires to Michelin Defenders.
Cut end of tail pipe off just behind rear axle (don't like the look of tail pipe coming out, this is cleaner looking)
Cut 7 inches off antenna (hits the garage top of door)
Added 3m clear protection on head lights. (was easy enough to do myself)
Took off Ford's 4X4 sticker and added my own.
Taking it soon to get tint put on front 2 side windows. Same as back or maybe a little lighter.
Added my Alabama (Roll Tide!) front collage tag.

I think she is looking pretty good now!

Looks Great Bob.

 

[Platinum Peasant]

Was the install as easy as it looked and works with no issues? I already have one here waiting to throw on day 1!

Beautiful ride and some tasteful mods already, man!

The install was as easy as the video showed, but I may have broken on clip of 8, no biggie. everything else went smoothly. Works like a charm!

 

[Platinum Peasant]

@currybob where did you get the film for the headlights?

 

[currybob]

@currybob where did you get the film for the headlights?

Amazon, I would take a photo but you can't see it.

I am not the best as this stuff ,so I used a sheet of paper to cut the shape. The I used scissors to pre-cut the 3m vinyl, pilled and sprayed it down like they show with a solution mixed and positioned it. Squeezed it down and wala.

https://www.amazon.com/VViViD-Protection-Choose-Including-Detailer/dp/B01M19KCBB/ref=sr_1_1?dchild=1&keywords=VViViD+3M+Clear+Paint+Protection+Vinyl+Film+12+Inch+Wide+Choose+Your+Size+Including+Tools&qid=1612109971&sr=8-1&th=1

 

[Daily22ssv]

1.cerimic IR tint windshield and all sides back glass.
2.spray in bed liner
3. Xpel PPF headlights and fog
4.escort radar install with mute switch
5.short antenna
6. Undercover ultra flex tri fold bed cover

 

[Platinum Peasant]

Amazon, I would take a photo but you can't see it.

I am not the best as this stuff ,so I used a sheet of paper to cut the shape. The I used scissors to pre-cut the 3m vinyl, pilled and sprayed it down like they show with a solution mixed and positioned it. Squeezed it down and wala.

https://www.amazon.com/VViViD-Protection-Choose-Including-Detailer/dp/B01M19KCBB/ref=sr_1_1?dchild=1&keywords=VViViD+3M+Clear+Paint+Protection+Vinyl+Film+12+Inch+Wide+Choose+Your+Size+Including+Tools&qid=1612109971&sr=8-1&th=1

Much appreciated my friend!!

 

[Chris]

Busy week for mine. Added:
• 2.25 inch readylift leveling kit
• 20x9 fuel wheels
• 34’s Nitto Ridge Grapplers
• Auto start stop delete
• short antenna
• catch can
• synthetic oil change
• fumoto quick drain plug
• bakflip mx4 cover
• husky liner bed mat
• wheel well liners

I think I’m done for this week lol

first bath completed today too

Where did you get your antenna from?

 

[Platinum Peasant]

Where did you get your antenna from?

Amazon!

 

[Chris]

Amazon!

Would you mind sharing a link or brand name? I appreciate it. Don’t want to get one that leaves a gap or doesn’t fit

 

[BDUBSpeed]

@currybob where did you get the film for the headlights?

XPEL makes a precut kit for these trucks. That's what I used on mine. Worked great! Or if you're good with a razor blade/knife, buy 3M clear paint protection film and make your own.

https://www.xpel.com/paint-protecti...ars--AND--Light-Trucks/2021/Ford/F_150/Lariat

 

[currybob]

XPEL makes a precut kit for these trucks. That's what I used on mine. Worked great! Or if you're good with a razor blade/knife, buy 3M clear paint protection film and make your own.

https://www.xpel.com/paint-protecti...ars--AND--Light-Trucks/2021/Ford/F_150/Lariat

I would have loved a pre-cut but I was not sure how well I would do applying it and did want to risk $125 vs $28.

The $28 was enough to do 4 headlights or more in case I messed up. This area was such a non-curve pretty straight forward job, I figured I could do that. I was able to and even did an area under each door handle.

I'm cheap I guess is what I'm saying.

 

[Kino]

I'm cheap I guess is what I'm saying.

It's being "thrifty"!

 

[currybob]

It's being "thrifty"!

Yes sir you are right!

Some see it as something else but not me. I save in a lot of little area's that allow me to splurge in area's that mean a lot to me.

 

[sonofzell]

...because what else would you do with your new $60k toy but start drilling holes in it?!

Sponsored