Kicker upgrade for b&o unleashed?

[Abraham5G]

sorry been off for a week, yes the box will miss the post. I have one riding in my truck now. Woofers are high enough to give them ample room. The KEY5001 will work, but a 800.1 or 1200.1 would be optimal, 12001 would have good overhead.

Thanks for the reply. What about the box volume? Kicker calls for 1.25-1.75 cubic ft per sub for the 12" L7T, this looks like only a 2 cubic foot box?

If this is just a 2 cubic foot box, could you make it deep enough to fit single 10" Kicker L7R or L7S instead? Kicker calls for 1.25-2.25 cubic ft for the 10" L7R.

Sponsored

 

[Graygoose2021]

Thanks for the reply. What about the box volume? Kicker calls for 1.25-1.75 cubic ft per sub for the 12" L7T, this looks like only a 2 cubic foot box?

If this is just a 2 cubic foot box, could you make it deep enough to fit single 10" Kicker L7R or L7S instead? Kicker calls for 1.25-2.25 cubic ft for the 10" L7R.

sent email to R&D designer.
Here are box sizes.
Probably wont fit the L7S or L7R
the L7T handles a sizeable amount of power, and a refined one "may be in the works

 

[Abraham5G]

sent email to R&D designer.
Here are box sizes.
Probably wont fit the L7S or L7R
the L7T handles a sizeable amount of power, and a refined one "may be in the works

Saw this in the 2024 Kicker catalog. Is this the same loaded enclosure that's in your truck?

 

[Graygoose2021]

Yessir, thats my actual truck they used for photos


They are small, F150 is 0.98 cu.ft

 

[Abraham5G]

Yessir, thats my actual truck they used for photos


They are small, F150 is 0.98 cu.ft

Only 0.98 cu ft available per sub with this enclosure? Kicker recommends a minimum of 1.25 cu ft per 10" L7T. This enclosure seems like it would be a better fit for a dual 8" L7T setup. Do you know if Kicker will offer this loaded with two 8" L7T's instead? I am in the market for something like this.

 

[Graygoose2021]

No, only in 10's. Silverado and GMC will be 12's.

Trust me, even though small, it gets it!

 

[Graygoose2021]

Shipped first 200 that came in yesterday, still on BO 177. More enroute, just for F150's.

 

[Abraham5G]

Only 0.98 cu ft available per sub with this enclosure? Kicker recommends a minimum of 1.25 cu ft per 10" L7T. This enclosure seems like it would be a better fit for a dual 8" L7T setup. Do you know if Kicker will offer this loaded with two 8" L7T's instead? I am in the market for something like this.

I take this back. This is a sealed enclosure, not vented. Kicker recommends 0.4-1.0 cu ft per 10" L7T in a sealed enclosure. This is in line with Kicker's specs.

 

[fordhouston]

BRO WTF kicker came out with the vehicle specific enclosure and i didn't know until just now!!

 

[fordhouston]

@Graygoose2021
correct me if i'm wrong.. but it sounds like you had something to do with the R&D of the f150 specific enclosure?

 

[fordhouston]

@Graygoose2021
?? lol

 

[fordhouston]

I take this back. This is a sealed enclosure, not vented. Kicker recommends 0.4-1.0 cu ft per 10" L7T in a sealed enclosure. This is in line with Kicker's specs.

that’s 1 of my concerns with this enclosure. vented would’ve been more preferred but oh well.

 

[Abraham5G]

that’s 1 of my concerns with this enclosure. vented would’ve been more preferred but oh well.

The enclosure is too small for vented, vented would require more cu ft and just one 10" L7T. I do prefer vented as well but am strongly considering this setup.

 

[Graygoose2021]

@Graygoose2021
?? lol

Sorry had to take wife to Dr yesterday

They used my truck for fitment, prototype,etc
I still have it in the truck.

 

[Graygoose2021]

Vented would be louder, but sealed will be more accurate and power forgiving.
Ported would be a larger enclosure.
These do get down though!

Sponsored