Agate_5.0
Member
- Joined
- Jan 18, 2022
- Threads
- 1
- Messages
- 23
- Reaction score
- 47
- Location
- Pennsylvania
- Vehicles
- 2021 Ford F-150
- Thread starter
- #91
YesIs the Raptor skid plate different than the Tremor?
Sponsored
YesIs the Raptor skid plate different than the Tremor?
ok thanks for the information!
Good point. Thanks.Would work. I’d get the plate powder coated though for durability
I was curious how this would look with the chrome bumper I have. Happy to see what it looks like I wish the antimatter could come with the colored bumper in the lariat when I ordered it. I am on the fence about switching the bumper for a painted one.***Finally got mine done too. Very happy with how it turned out!***
Is the silver piece that has to be painted the piece that goes around the tow hooks? Thanks***Finally got mine done too. Very happy with how it turned out!***
Does anyone have the part number for the Tremor skid plate?Is it possible to trim the valence and bolt up a raptor skid plate?
https://www.f150forum.com/f118/raptor-skid-plate-my-2018-f-150-xlt-421081/
Like this? Maybe?
Page 1Does anyone have the part number for the Tremor skid plate?
Thanks. So ML3Z-5D032-B is the Tremor skid plate, not the Raptor? I've read through this thread and others and I was getting confused as to what the actual pat number was. So all the parts you listed in the initial post are up to date and all I would need to add the Tremor skid plate to my Lariat 5.0?Page 1
Page 4: https://www.f150gen14.com/forum/threads/2021-f-150-tremor-skid-plate-swap-parts.8244/post-238519Thanks. So ML3Z-5D032-B is the Tremor skid plate, not the Raptor? I've read through this thread and others and I was getting confused as to what the actual pat number was. So all the parts you listed in the initial post are up to date and all I would need to add the Tremor skid plate to my Lariat 5.0?
Looking forward to seeing the end result. I so want to do this but have been holding out in hopes of finding a used one. All in, how much do you figure it cost you if you don't mind sharing?Just ordered all the parts to do this to mine. I already did the Tremor rear bumper swap on my truck and added dual exhaust. This will complete the look I wanted for my truck when I got it.
The only expensive thing is the skid plate itself. Was scouring ebay forever, but never was able to find one. Mine was $1300 at dealer cost or very close to it for everything. I work in the business and have connections as I used to work at two different Ford dealers here where I live.Looking forward to seeing the end result. I so want to do this but have been holding out in hopes of finding a used one. All in, how much do you figure it cost you if you don't mind sharing?