Millionvill3
Member
- Thread starter
- #1
If you have been a victim of your truck shifting hard or lurching in any gears it is probably due to the truck being “hot rodded” or accelerating hard right off the transportation truck. Not uncommon for a dealer to test out the “first of its kind” when it comes to power and performance. My truck being the first powerboost to hit the ground in nw florida it had a good bit of miles on it. (60)
from day one I have experienced hard shift from 1-3 and from 4-5. The other day using forscan, I was able to “reset” the shift learning pattern. I will add screen shots later of what the actual page looks like.
I have not had a bad shift since I reset the module. Looks like problems solved. Roughly 600 miles since the reset.
from day one I have experienced hard shift from 1-3 and from 4-5. The other day using forscan, I was able to “reset” the shift learning pattern. I will add screen shots later of what the actual page looks like.
I have not had a bad shift since I reset the module. Looks like problems solved. Roughly 600 miles since the reset.
Sponsored