RyanStroeder
Well-known member
- Joined
- Nov 1, 2021
- Threads
- 30
- Messages
- 247
- Reaction score
- 119
- Location
- Calgary, Alberta, Canada
- Vehicles
- 2021 F-150 Powerboost - Leadfoot
By using the MoBridge, were you able to retain the use of the existing speaker wiring? Or you need to run all new wiring for the speakers? thanksFigured I'd post and update and note come changes I made from my original design... My first design was centered around the NavTV Zen which is super-common to F150 update applications yet lacks any features for channel cross-over or time delay so there's no accommodating these needs with the setup I started with. Taking this into account I switched to the mObridge DA-G2.PRO A2B FORD PREAMP & DSP, which accommodates 12-channels of independently configurable audio output. As I already had non-DSP quality audio amplifiers I figured this was an easier route than upgrading to DSP configurable amplifiers. The added benefit is that all control is in one interface rather than being dispersed across multiple amps.
Also, did you end up using the DSP in the mobridge and/or the audio control? both?
Sponsored
Last edited: