Request VIN Lookup Thread

[rugedraw]

Thanks rugedraw, this is what it’s at now after replacement.

Everything looks good on the surface. There's just one little detail about how the module was programmed that for some reason is not showing in vehicle history that i am unsure about. Stand by while I get a second set of eyes to check and make sure everything is fine.

Sponsored

 

[Mstephens20]

Everything looks good on the surface. There's just one little detail about how the module was programmed that for some reason is not showing in vehicle history that i am unsure about. Stand by while I get a second set of eyes to check and make sure everything is fine.

Thank you!!! @rugedraw

 

[2BigDogs]

Keep in mind that FDRS supersedes the OTA process. If you're updating with FDRS, there is little to nothing to be sent to you via OTA.

With that said, you have GWM update 24-PU0227-VI-RBS sitting in your queue since yesterday. It seems like you haven't driven the truck in a few days. Go start it and let it run for a few minutes. That should be enough to get it to install.

Started the truck and let it run in generator mode for 10 minutes... OTA update successful!

Thanks @rugedraw!

 

[Loganinthenorth]

@rugedraw do you think that my truck would be a possible candidate for the tsb/diy with mongoose or do you think it will need a new apim?

 

[rugedraw]

@rugedraw do you think that my truck would be a possible candidate for the tsb/diy with mongoose or do you think it will need a new apim?

I would advise against it, but there is a snowball's chance in hell it will work. @Pr0sacK was in the same situation and he got his APIM out of the broken state, but this is not the typical experience when it comes to this. You can try, but the success rate is VERY low.

 

[Loganinthenorth]

Thank you very much for your help and the information.

 

[gsuman84]

Do I have any OTA updates? VIN: 1FTFW1ED0MFA46828

 

[rugedraw]

Do I have any OTA updates? VIN: 1FTFW1ED0MFA46828

No active OTA at this time. OTA history shows you've had a door module update sent to you several times and it failed every time with some hash error; not sure why that's happening.

 

[gsuman84]

Interesting. Thanks so much!

 

[Kidder]

@rugedraw and @Jesse-Infotainment are the best! Just had to say it.

The others who help with lookups rock, too.

 

[Demps]

VIN #1FTFW1ED1MFB59560

Was checking software updates. When I clicked on Update Now got this new to me message.
Just curious what the message might mean.

 

[JFollow]

I just got my truck back from the dealership for pre 3/36 warranty expiration work. One thing they did was update APIM per TSB 22-2226. The write up says there were a number of updates available. I’m curious what they did (because I thought I was fairly up to date) and where I stand…thanks
1FTFW1E57MKD20235

 

[rugedraw]

VIN #1FTFW1ED1MFB59560

Was checking software updates. When I clicked on Update Now got this new to me message.
Just curious what the message might mean.

Not sure why that's there, but you got OTA 24-PU0223-VI-RBS sent to you on 4/20 and it went through fine. Nothing has been sent since then.

I just got my truck back from the dealership for pre 3/36 warranty expiration work. One thing they did was update APIM per TSB 22-2226. The write up says there were a number of updates available. I’m curious what they did (because I thought I was fairly up to date) and where I stand…thanks
1FTFW1E57MKD20235

You're on the latest Sync version and only showing the updates below, so it seems like they updated a bunch of stuff. Lucky you.

 

[JFollow]

You're on the latest Sync version and only showing the updates below, so it seems like they updated a bunch of stuff. Lucky you.

Thank you! I mentioned getting headlamp faults at startup…seems like the headlamp control module update would have been appropriate.

 

[rugedraw]

Thank you! I mentioned getting headlamp faults at startup…seems like the headlamp control module update would have been appropriate.

You would think so, huh?

Sponsored