Kanuck
Well-known member
Thanks...I found that one, but it says 2022's not the 21's for the BCM update. Now theis old man is confused.
Sponsored
Thanks...I found that one, but it says 2022's not the 21's for the BCM update. Now theis old man is confused.
Could have mentioned thatThanks...I found that one, but it says 2022's not the 21's for the BCM update. Now theis old man is confused.
Sorry - I was looking for the one relating to the 21's or am I wrong in thinking the BCM update screws up the quad lights on the 21's and not the 22's. That SSM 52075 refers to 22's. Now I really confused.Could have mentioned that
Tim, I'd be interested in buying it... PM me please sirquestion for the group. I purchased the Mongoose Plus J2534 last year and with the help of folks on here I got my truck updated and everything works automatically now with updates. I would like to sell my device. Is the device tied to my name in anyway? Do I need to deactivate or unregister the device to sell it? If anyone has any idea I'd appreciate the help! Thank you.
You need truck on external power supply if you plan to do any updates with FDRS.attempted to update IPC to night and within 5 seconds it failed. what a pain.
i have a Shumacher charger with 10a charge and 50a boost... failed on both setting. i may have to get a new battery. I'm sure ford won't replace it.You need truck on external power supply if you plan to do any updates with FDRS.
I have had good luck using a similar charger. Just make sure the battery is fully charged before you start and keep the charger on during the update.i have a Shumacher charger with 10a charge and 50a boost... failed on both setting. i may have to get a new battery. I'm sure ford won't replace it.
Any time!I want to publicly thank @Jesse-Infotainment for helping me out this morning. I applied all of my available updates and after the final IPC update, which appeared to complete as expected, I received dozens of DTCs. After walking me through running a PMI on the IPC and resetting a few modules in Forscan, I was left with one DTC for my IPMA that I couldn't get to clear. He took a look at my truck and it was related to me disabling the reverse sounder in Forscan. He connected in and made a few changes and now everything is clear!
Very excited to be up to date for the first time since Nov 22 and hopefully just one step away from BC 1.4!
Thanks Jesse!