Downloading Power-Up 6.8.0 Today

[Kodiak]

Got 6.5.0 on Saturday, 6.8.0 is scheduled for tonight at 1am. We shall see. 6.5.0 failed twice due to low SOC. I have my truck on my 10A charger now and will disconnect it before I go to bed. We shall see...

Me too. I just got 6.5 last week and now I just got 6.8. I wonder if they have some kind of OTA rotation that reverses the order for the trucks that get the update. If you are the at the end of the revision rollout than you move to the beginning of the next update.

If this is the case then we are back to the end of the line for the next one.

Sponsored

 

[fordtruckman2003]

After the 6.5 update, my sync4 screen would default to the settings mode when starting the engine. I would always set it to Nav, but the next time I would crank the engine, it would go back to settings. I thought the 6.8 update which finally came a week ago, would fix it, but unfortunately that didn't happen. It use to default to whatever screen you were last in. And now, the front collision warning alert has become painfully sensitive. Just wondering if anyone else is having this issue.

For me 6.8.0 fixed going to settings screen even though it should have zero to do with it.

Check your settings it probably reset them. I had to turn down collision assist when I bought truck because it was overly psycho freaking out in drive thru and such.

 

[Moe7]

Me too. I just got 6.5 last week and now I just got 6.8. I wonder if they have some kind of OTA rotation that reverses the order for the trucks that get the update. If you are the at the end of the revision rollout than you move to the beginning of the next update.

If this is the case then we are back to the end of the line for the next one.

Wouldn't surprise me, I got 6.4 and 6.5 within days of each other before mid-December, but nothing since.

 

[Kidder]

Got 6.5.0 on Saturday, 6.8.0 is scheduled for tonight at 1am. We shall see. 6.5.0 failed twice due to low SOC. I have my truck on my 10A charger now and will disconnect it before I go to bed. We shall see...

And replying to myself (lol), 6.8.0 did indeed install last night. I assume it is because I had the nearby nuclear plant plugged into my battery, @rugedraw.

 

[tilefordude]

i got an update after 6.5 but it doesnt say 6.8

 

[fordtruckman2003]

i got an update after 6.5 but it doesnt say 6.8

DOR2? Door modules for me immediately followed 6.5.0. Then 6.8.0 month later. Now DSP update I didn't expect to get. Whack-a-mole random update process continues.

 

[DK4]

I just got 6.8, successfully installed in a gas station parking lot during a short road trip. Yay.

6.5 was only a couple days ago.

 

[zacko11288]

Wouldn't surprise me, I got 6.4 and 6.5 within days of each other before mid-December, but nothing since.

Same here, I was consistently about 3 weeks behind the first reported update on the forum. Got 6.4 and 6.5 back to back early December and nothing since

 

[Abraham5G]

For me 6.8.0 fixed going to settings screen even though it should have zero to do with it.

Check your settings it probably reset them. I had to turn down collision assist when I bought truck because it was overly psycho freaking out in drive thru and such.

How do you reset the settings for the sensors on the bumpers? Mine are always in alarm when I shift into reverse, and the front ones too, even though there are no objects in the way.

 

[mau47]

How do you reset the settings for the sensors on the bumpers? Mine are always in alarm when I shift into reverse, and the front ones too, even though there are no objects in the way.

I just had an issue where my front sensors weren't triggering at all, not sure if the same fix will work for you but an IPMA reset in forscan fixed my issue.

 

[fordtruckman2003]

How do you reset the settings for the sensors on the bumpers? Mine are always in alarm when I shift into reverse, and the front ones too, even though there are no objects in the way.

No idea, I don't have front sensors.

I like the module reset idea above. That is like a reboot won't hurt anything.

 

[Abraham5G]

I just had an issue where my front sensors weren't triggering at all, not sure if the same fix will work for you but an IPMA reset in forscan fixed my issue.

No idea how to do an IPMA reset, but I will look into this.

 

[fordtruckman2003]

Forscan should be under wrench icon.

It might work or might not but it won't hurt. Forscan can also show you any codes that might help point you in right direction.

 

[Abraham5G]

Forscan should be under wrench icon.

It might work or might not but it won't hurt. Forscan can also show you any codes that might help point you in right direction.

Do you know if it's possible to perform the IPMA reset as suggested via FORScan Lite (the Android app)? I'd like to know before spending $7 on the license.

 

[fordtruckman2003]

Get the Windows version.
Free trial.

It's good software that can do a lot of things for you if you have any interest in DIY vehicle work.

Sponsored