Dealership visit today - No issues! Its a Good day!

[Cobraman428]

Took my 21 Job2 PB (aka Optimus Prime) in today for its second oil change & tires rotation. Also had them check the rear differential fluid. All good. No axle bolts broken off and they cleared a DTS on BLIS.
In and out in less than two hours and for a bonus I got my best MPG today.

Sponsored

 

[Samson16]

Great news Cobra!

Did you rotate your tires at the first oil change as well? I didn't, but I will for my second. Thanks for the reminder. I have an October '22 PB and I don't know what "Job" that is or do we use the term only for the earliest '21s?

 

[Cobraman428]

Job1 is the first half of the model year and Job2 are the second half of the year. My truck was made in November. I always get the tires rotated when I get an oil change. I'm just glad they didn't find a broken axle bolt on the rears....

 

[Hendog]

Took my 21 Job2 PB (aka Optimus Prime) in today for its second oil change & tires rotation. Also had them check the rear differential fluid. All good. No axle bolts broken off and they cleared a DTS on BLIS.
In and out in less than two hours and for a bonus I got my best MPG today.

Good for you! There is no way on Gods green earth I could get that service done in a day here in Memphis, much less a couple hours.!

 

[Cobraman428]

Good for you! There is no way on Gods green earth I could get that service done in a day here in Memphis, much less a couple hours.!

Yes, I'm lucky I have a great dealership where I purchased the truck. They take care of the customers. Appointment time was 9:30a and out the door by 11:20am. Even got $5 of "vending machine money" for snacks/coffee while I waited for the service to be done. Ferman Ford Clearwater. I guess that is old school dealership way of doing business.. Make your customers happy.

 

[Samson16]

Job1 is the first half of the model year and Job2 are the second half of the year. My truck was made in November. I always get the tires rotated when I get an oil change. I'm just glad they didn't find a broken axle bolt on the rears....

My truck was made in October of 2022, so it's a '22 job 2 then.

 

[JExpedition07]

Can we rotate the tires without retraining TPMS? My STX seems to know which tire has what pressure, or is it based on range of the sensor on that wheel?

 

[Cobraman428]

Can we rotate the tires without retraining TPMS? My STX seems to know which tire has what pressure, or is it based on range of the sensor on that wheel?

I would think each tire has a unique code/ID and the truck would update its config to show that tire correctly on the TPMS dispay.

Sponsored