22 STX leather upgrade OEM from Lariat. Add Heated and Cooled seat completed

[CaliF150]

Interior Upgrades now also complete.
Leather from ebay New Take off. Rear leather seat stitched properly so there is no hole for arm rest.
Front seat heating aftermarket
Cooled driver seat. Did it my self using fans ordered from AliExpress w a speed controller. 1 Fan from below 2 from the back. Nice and cooled during hot days no back sweat
(see links to products for seat cooling below.)
Interior lighting OEM parts.
Kia rear view mirror w Compass
Overhead switches for of road lights and other accessories .
Many other things to mention.
kia Mirror part I ordered A7062-ADUP1. https://www.f150forum.com/.../homelink-rear-view-mirror.../
for interior LEDs
https://www.f150gen14.com/.../cup-holder-light.../
Steering wheel leather cover from Amazon
https://www.amazon.com/dp/B09Z2M2MLJ/

Rear seat center hole removed with no arm rest via Ebay purchase
https://www.ebay.com/itm/225706986044

Few folks asked me about cooled seat parts I used. It is a my own combination of parts I found on the cheap.
Was easy to make really. You can look at my instagram. I did this to my previous vehicles.
https://www.instagram.com/trucks_guy/
here is the list of products I used and made my own combination of things.
Side air draw fans w controller (You pick how many fans you need)
https://www.aliexpress.us/item/2251832732640239.html
Direct air push fans w controller.
https://www.aliexpress.us/item/2255800744953109.html
Foam designed for air flow.
https://www.aliexpress.us/item/2251832624237873.html
You can also use air guide (its soft rubber like) I did not use it.
https://www.aliexpress.us/item/2251832626003211.html

Sponsored

 

[Mcfly]

This is an older thread but I just purchased a set of Lariat leather take off from ebay and have some questions on the install. Did you do it yourself? I'm looking to swap these for my oem vinyl. Did you have a shop fill in the arm rest hole in the back seat? Looks like you maybe in the Los Angeles area. If so I would like to use the same shop.

 

[CaliF150]

This is an older thread but I just purchased a set of Lariat leather take off from ebay and have some questions on the install. Did you do it yourself? I'm looking to swap these for my oem vinyl. Did you have a shop fill in the arm rest hole in the back seat? Looks like you maybe in the Los Angeles area. If so I would like to use the same shop.

Sorry for late reply. I did it my self. The rear seat I ordered another piece from ebay
here is link for that https://www.ebay.com/itm/225706986044

 

[Mcfly]

Sorry for late reply. I did it my self. The rear seat I ordered another piece from ebay
here is link for that https://www.ebay.com/itm/225706986044

Thanks for the info, how difficult would you say the install was? How much time per seat?

 

[CaliF150]

Thanks for the info, how difficult would you say the install was? How much time per seat?

It took me about 2 days. 4 hours for front seats first time. When I redid it. Took me only 1 hour per seat. Rear seats took longer at first. I done this a few times by now. So its easy for me. But expect about 1 hr per seat

 

[Mcfly]

It took me about 2 days. 4 hours for front seats first time. When I redid it. Took me only 1 hour per seat. Rear seats took longer at first. I done this a few times by now. So its easy for me. But expect about 1 hr per seat

Cool, I did the head rests yesterday. The seats look simple enough, just tedious. The center armrest cover came with the take offs I bought. I'm going to see if a local shop can fill in the hole. I'll post some pics here once I'm done.

 

[Mcfly]

Done with the install, it wasn't bad. Need to take a heat gun to get some of the wrinkles out. Happy with it, way better than the vinyl.

Sponsored