2022 F-150 heated and cooled seats OEM conversion?

[Alonzo8388]

does anyone know what’s needed to make this conversion work, I already have AC control unit with heated and cooled seat buttons, I’ll need to OEM seats with heated and cooled options, will I need the floor seat harness on driver side and passenger side ??

Sponsored

 

[evoslayer]

Ever figure this out?

 

[Alonzo8388]

Got really good help from Jesse@infotainment , pretty much wiring up all power and grounds and having access to wiring diagrams, I haven’t done the conversion, I need to gather parts first

 

[dolsen]

I have seen bits and pieces of where Jesse laid out his conversion in his XL. The heated and cooled seats as well as passenger and driver seat harness are required. I do not know if it requires a new DSM, but very well could.

 

[Alonzo8388]

Yes u will need the DSM

 

[dolsen]

Yea my bad I think I posted at about the same time as you

 

[Iceman2022]

Has anyone done this that can share what all was involved? Do you need to get a set of seats that are already cooled or could you add it to XLT seats? I already have the perforated Kazkins instead.

 

[Alonzo8388]

Your better off getting OEM seat off a crashed truck with all modules under seat , OEM seats with heated and cooled options

 

[Iceman2022]

Your better off getting OEM seat off a crashed truck with all modules under seat , OEM seats with heated and cooled options

Is there anything besides seats, HVAC module and programming that is needed? I was also curious if a set of 13th gen Platinum seats would work.

 

[riderryan92]

Has anyone put together a parts list with wiring diagram for doing this?
Just checked, my truck does not have a DSM so I'll need to add that.

Does the harness going to the seat have all the wiring or do I need to run additional wiring?
2022 XLT with 360 cameras
Any thoughts on this @Jesse-Infotainment ?

 

[Jesse-Infotainment]

Has anyone put together a parts list with wiring diagram for doing this?
Just checked, my truck does not have a DSM so I'll need to add that.

Does the harness going to the seat have all the wiring or do I need to run additional wiring?
2022 XLT with 360 cameras
Any thoughts on this @Jesse-Infotainment ?

you texted me .> You gotta give me a chancel I am busy today.

 

[riderryan92]

you texted me .> You gotta give me a chancel I am busy today.

Not trying to rush you, Was more of a group question.

 

[HammaMan]

If you have an XLT 302a, you'll have to run 8 wires to the passenger seat harness from the driver's seat harness, a power wire to C265, 2 wires from driver's seat to canbus MS1. If you also want MCS in the future you'll have to run another wire from C265 to the driver's seat, MS1 to the passenger seat, and the latter wire of C265 would need run to the passenger seat as well (split at C265).

 

[Jesse-Infotainment]

 

[HammaMan]

...

Image 2 and 4 aren't really required if he's able to get the full seats. Those just show intra-seat wiring.

What's the difference in the cushions? I don't suspect you took images by chance? I put the lariat leather into my XLT 10 way seat and the cushions are different. Just not sure how different and what holes / slots may be present for airflow.

Sponsored