2022 F150 Lariat V8 aka ZeroDark30 Build!

[Jimi]

Not really a build per se just a couple mods on my 22 502A Lariat. I have owned it a little over one month even though I ordered it in December.
1. Ceramic tint (5% all around and 50% windshield.)
2. 18" Method 314s on 33" Kendas.
3. Rough Country soft roll up tounneau cover.
4. Removed rear blocks, have 1" drop shackles from MaxTrac (installed...see last photo in gallery)
5. Dickeys heavy duty liners from Autozone ($39 haha!)
6. Removed hideous "4x4" stickers.
7. LED license plate light bulb upgrade.
8. Corsa Extreme dual rear exit catback

I don't think I am doing anything else to it. I am going back and forth whether I should get some mud guards for it. What do y'all think?

View attachment 60924

Very nice truck, but I was thinking about lowering my 2023 Lariat, maybe 2 or 3 in. Do you have any direct side pics. If so then I would know exactly what a 1 in. drop looks like. Again nice truck.

Sponsored

 

[diambo4life]

Very nice truck, but I was thinking about lowering my 2023 Lariat, maybe 2 or 3 in. Do you have any direct side pics. If so then I would know exactly what a 1 in. drop looks like. Again nice truck.

Hello there,

The first 4 photos you copied from my first post are with the truck with an approximately 1" drop in the back (1.25" blocks removed.) If you look at the photos on page 4 or 5 of this thread you can see how the truck sits with an additional 1-1.5" drop (with the 1" shackles installed.) My truck had about 3-4" rake stock. I think I have photos on the other site how it looked with the stock stance. It has approximately 3/4" rake now....so that was almost a 2-2.5" drop.

 

[nezff]

first pics on thread are only 1 inch drop?

 

[diambo4life]

first pics on thread are only 1 inch drop?

Yes...approximately 1-1.25". That was with only rear blocks removed.

 

[diambo4life]

This is with the stock stance. SEE THIS

 

[diambo4life]

Just random ass photographs

 

[harry brown]

Looking great

Tutuapp 9Apps Showbox​

 

[diambo4life]

Took a few photos today. I recently added some Bilstein B6 shocks in the rear and a stubby antenna. Loving this badass truck.

 

[diambo4life]

A few more...

 

[Davidwnuc]

looks great. best kind of level….bring that a$$ down.

 

[diambo4life]

Thanks and I am enjoying the great gas mileage too haha....

 

[diambo4life]

And another one.../DJKhaled

 

[HammaMan]

Not really a build per se just a couple mods on my 22 502A Lariat. I have owned it a little over one month even though I ordered it in December.
1. Ceramic tint (5% all around and 50% windshield.)
2. 18" Method 314s on 33" Kendas.
3. Rough Country soft roll up tounneau cover.
4. Removed rear blocks, have 1" drop shackles from MaxTrac (installed...see last photo in gallery)
5. Dickeys heavy duty liners from Autozone ($39 haha!)
6. Removed hideous "4x4" stickers.
7. LED license plate light bulb upgrade.
8. Corsa Extreme dual rear exit catback
9. Bilstein B6 rear shocks (added Jan 2023)
10. Stubby antenna (forget vendor) - added Jan 2023
11. Whipple Stage 2 - added March 2023.

Looks good, I'm playing with a silver stripe on a similar front end. I'm going to retain the reflector headlights and paint them while smoking the turn signal.

 

[diambo4life]

How much smoking are we talking about? I want to lightly do mine but it's not something I want to screw up. These assemblies are not cheap.

 

[HammaMan]

How much smoking are we talking about? I want to lightly do mine but it's not something I want to screw up. These assemblies are not cheap.

Well the reflector LED's turn sigs are obnoxiously large. I'm going to either black out or 5% the angled sections and at least 50% mirror (or maybe tint, based on how it looks) the front / center area while upgrading to brighter LEDs (they come incandescent).

These show the size of it, they blacked them out fully. I'm currently trying to get a damaged set to see about painting the chrome in the center as that's got nothing to do with the lights -- their reflectors are in the rear

Sponsored