Traction Bars

[MonkeySpank]

I've searched the forums and don't really see anything related to my questions.

Has anyone put in traction bars for f150 crewcab shortbed 5.0 that is lifted 6+inches? I feel I'm starting to get axle wrap issues in the rear but almost everything available for purchase maxes out at 2020 models.

Feel like I'm going into custom fab territory, Has anyone successfully installed 2020 traction bars on a 14th gen f150 without welding onto the axle tubes? Any insight would be appreciated.

Sponsored

 

[beefcake]

https://www.beefcakeracing.com/vas-2021f150tractionbarkit/

these are the ones we run. 0 issues

 

[MonkeySpank]

Thank for the input, but think that's more for racing applications. Those only stops axle wrap in one direction and lose a significant amount of ground clearance.

Was looking more for ladder type which seems to be only for older gens or custom ones that require welding.

Thanks again.

 

[TheGoatman]

Might need a full raptor +2 spring pack and go back to a stock block, alcan custom or at least a RAS to help manage the axle wrap.

 

[Jmet8]

Hellwig and steeda makes a rear sway bar kit that will help tighten the rear end up and lessen the body roll. Bwoody is another company that makes chassis Stuff. All so research rear shock relocation bracelets that would make the shocks more vertical which will improve the ride quality. Good luck.

 

[Lobostang77]

Doesn't BDS make traction bars for their lift kits?

Sponsored