Bike Rack Setups - Show Yours!

[{tpc}]

Anyone have any ideas for a "Lectric" bike rack for the bed? At 66 inches unfolded, it could be a tight fit.

Sponsored

 

[KTM753]

..I saw a product that attached them to the tailgate for easier loading and unloading; always thought a DIY version could be a good option (attach that pressure treated mount to the tailgate?):

From https://www.railias.com/collections/all-products/products/truck-system

That's a neat system, never seen it before. Thanks for posting.

I am with you on the DIY idea. I would just install Rivnuts in the tailgate and screw a bike mount in and out as needed. Or install L-track and use a screw down l-track mount.

I like the umbrella option, I have seen hitch mount umbrellas before but seem cumbersome with having to mount back under the tailgate. On top of the tailgate has me thinking about a DIY solution...

 

[in_venere_veritas]

Rhino Rack. Great quality at a fair price.

 

[fwunder]

 

[GregBC]

Tailgate pad for mtn bikes.

For trips where we need the bed, I have a 6yo Swagman 4-bike rack that works so- so and goes into the hitch. I have to loosen/turn handlebars to get more than 2 on. It folds down about 20-degree with the bikes on to allow tailgate to almost fully open, which is nice.

 

[4x4TruckLEDs.com]

We have a Rhino-Rack carrier on some Vortex bars attached to the bed of our truck

Everything shown we sell so if you are interested in outfitting your truck, shoot us a message

 

[Kurt V]

Hey Everyone,

I’m just curious what is out there for various mountain biking and road bike setups, would like to see a bunch of pics of everyone’s setups!

I have the Mach 2 by QuikrStuff. Top of the line rack that is rock solid. if you are into e-bikes, it can hold a ton of weight and come with an optional ramp. Extra ramps are moduler up to 4 bikes. QuikrStuff.com

1 bike – 120 lbs
2 bikes – 240 lbs
3 bikes – 300 lbs
4 bikes – 185 lbs

 

[Mtntrls]

Kuat Piston SR, now x2, over the bed. Used to have a Kuat NV 2.0, now a Kuat Piston Pro X for the hitch. No photos of the new hitch rack yet. Love being able to throw two on with no hitch and access the bed, or to have 4 stable racks if needed when shuttling/traveling.

 

[ANZAC]

Retrax w/ rails (Ford version)
Yakima Landing Pad 1
Yakima Skyline Towers
Yakima Skyline Racks (70")
1UP Roof Rack style w/ Flush Kit

Note: the Retrox handle clears the bars no problem.

 

[somecatchyphrase]

I use the Kuat NV 2.0 along with their Pivot to allow for the bikes to remain on the rack and still access the tailgate. I have found this setup to be essential for our camping trips. We have fat bikes with 4in tires and this is one of the few racks (at least at the time I was shopping around) that can accept that large of a tire. I've had the rack for 5+ years and no issues/love it.

 

[gtotco]

Yes. I used the following parts, all from Rack Attack:
1. Rhino rack Vortex bars - 71” RRVA180B
2. Rhino rack Quick Mount leg - RRRLT600
3. Rhino rack Wuick Mount heavy duty spacer 20mm - RRQMHD20

The 20mm spacer is key, since it raises the rack just enough that the handle on the RetraxPro XR can slide underneath.
Here’s a pic:

Oh - this is a good tip on the spacer. I'll have to order those since I have same setup with retrax xr and rhino rack and the handle catches. Otherwise liking this setup, though I think going to grab different racks for on top as I have Yakima High Rollers and they are sort of a pain in the ass to use. I'd rather pop off the front tire and just get something that fork mounts. I had just bought wheel on because they used to be on my GTI and didn't have much room for wheels in the back.

Sponsored