Relocate Front License Plate Holder.

[JerseyGlock]

I'm thinking of relocate front plate holder on my 21 PB. Any inputs or aftermarket brackets.

Sponsored

 

[Doyouevenboost]

I'm thinking of relocate front plate holder on my 21 PB. Any inputs or aftermarket brackets.

Swarfworks is nice!

 

[JerseyGlock]

Swarfworks is nice!

Can this trim piece be pop out?

 

[Doyouevenboost]

Can this trim piece be pop out?

Probably not how you would want it to. The adaptive cruise control module is right above the drivers side tow hook.

 

[JerseyGlock]

Probably not how you would want it to. The adaptive cruise control module is right above the drivers side tow hook.

Thanks and I planned on mounting the plate at same location as yours. My question on that trim piece is one piece?

 

[jaggah]

Swarfworks is nice!

Is it this- https://swarfworks.com/2015-ford-f150-raptor-front-license-plate-relocation/

Did you need to drill any additional holes? How was the install

 

[powerboatr]

i lowered mine to connect and used a superduty front plate holder
i used two 10/32 machine screws to hold holder to truck and the back has 2 plastic legs that keep it from falling back flat,

 

[Doyouevenboost]

Is it this- https://swarfworks.com/2015-ford-f150-raptor-front-license-plate-relocation/

Did you need to drill any additional holes? How was the install

Nope! Clamps to the tow hook with two screws

 

[StoneGray22]

Mishimoto has a kit, but it's a bit pricey. Presumably it will work on 14th gen:

https://www.mishimoto.com/license-plate-relocation-ford-f-150.html

 

[Captain Chaos]

I relocated mine to under the back seat......

 

[SpaceWhiteF150]

Will the mishimoto fit?

 

[Tobstertx3]

Is the front plate screwed into the truck or secured with clips? I plan to remove mine so just wanted to know if I need to I for the dealer not to install if it is screws.

 

[JerseyGlock]

Is the front plate screwed into the truck or secured with clips? I plan to remove mine so just wanted to know if I need to I for the dealer not to install if it is screws.

Clips / tabs.

 

[SpaceWhiteF150]

Does the swarfworks have an isolator between the metal and tow hook?

 

[SpaceWhiteF150]

Can you send some close up pics of how it mounts? And the distance between the bumper and frame. Thanks!

Sponsored