Leveled or Lifted "Long Bed" 157" Wheel Base Photo Thread

[SteveAndTheCrigBoys]

I've pretty much exhausted Custom Offsets and google searches. Anyone else have a leveled or lifted 6.5' bed supercrew to share?

Waiting for a mid-year bonus to put any money towards it, but planning on a 4" BDS on 18's positive offset Method wheels and 35'x12.5's on my '23 silver XLT. If anyone has that with a canopy as well that would be sweet.

Sponsored

 

[z-man]

Not 18's but a long bed with 20's.

Size: 20x9 Offset: 18. More info in signature.

 

[ryanc111]

Ask and ye shall receive. 4" BDS lift with Method 18" wheels.

 

[Ajzride]

17s with a 2” level

 

[Jimalt]

I've pretty much exhausted Custom Offsets and google searches. Anyone else have a leveled or lifted 6.5' bed supercrew to share?

Waiting for a mid-year bonus to put any money towards it, but planning on a 4" BDS on 18's positive offset Method wheels and 35'x12.5's on my '23 silver XLT. If anyone has that with a canopy as well that would be sweet.

 

[Jimalt]

275/65R20 BFG KO3’s, Eibach Protruck Coils/shocks, Airlift in rear 10psi (only add air when towing), Roush F150 Iridium wheels.

 

[Ranger621]

Here's my 2010 and 2022 Lariat's. Both are leveled. Both have 18" wheels

 

[Boyk1182]

How would you say these wheels clear with the same tires compared to stock wheels (I’ll try to explain what I mean)? I have 295/65R20 tires on stock wheels and they fit but are close. I’ve been looking at these and am wondering if they would fit with the slight change in offset.

 

[Jimalt]

How would you say these wheels clear with the same tires compared to stock wheels (I’ll try to explain what I mean)? I have 295/65R20 tires on stock wheels and they fit but are close. I’ve been looking at these and am wondering if they would fit with the slight change in offset.

You have 35” (295/65r20) with +44mm offset and I have 34” (275/65r20) with +18mm offset. Mine barely clear without rubbing and 35’s would definitely need me to trim something near the mud flap area on the front. I could adjust my Eibach’s up a little more but it would still rub when compressed and turning so trimming would be required. Perhaps even removing the black metal bar behind the wheel. BUT, I love my setup so I am glad I stuck with 34’s.

 

[SteveAndTheCrigBoys]

Ask and ye shall receive. 4" BDS lift with Method 18" wheels.

Pretty dang close to what I’m going for, thanks for sharing. Wish the GFC’s weren’t so pricey, but they all are compared to a fiberglass.

what mudflaps are those, OEM?

 

[ryanc111]

Pretty dang close to what I’m going for, thanks for sharing. Wish the GFC’s weren’t so pricey, but they all are compared to a fiberglass.

what mudflaps are those, OEM?

Yup, OEM mudflaps.

 

[780]

2" level, factory 20's on 35x11.5 Toyo AT3's.

 

[Gooner5643]

2.5” level. 18x9 +18 methods. 325/60/18 nitto ridge grapplers. Tires rub spc control arms only at full droop mainly because I have -1.4 degrees camber for better handling. Think -.75 camber wouldn’t rub anything.

 

[Prufrock]

275/65R20 BFG KO3’s, Eibach Protruck Coils/shocks, Airlift in rear 10psi (only add air when towing), Roush F150 Iridium wheels.

Did you adjust the front coilovers or left them at original setting?

 

[Jimalt]

Did you adjust the front coilovers or left them at original setting?

I left them at the setting that Eibach supplied them. They are adjustable while installed and come with the spanner wrench in case you need to adjust them. No need to remove them to adjust like the Fox.

Sponsored