Bought a 72 hour FDRS license, anybody need anything?

[John_C]

As the title states, I bought a 3 day license to FDRS to help with a retrofit I am doing. I already got what I needed from it, but I have 72 hours left on the license. If anybody needs wiring diagrams, part numbers, repair procedures, etc, let me know and I will see what I can do. I can also access vehicle histories (to see what dealers have done with FDRS while it was in for service), I can pull up what OTA updates you have/don't have (or ones that have failed), current recalls/TSBs, etc. Hit me!

Sponsored

 

[jcaspar]

Would you mind checking mine? 1FTFW1ED1MFA6134
OTA updates stuck at 2.0 I have an appt with dealer on Thursday hopefully for BlueCruise but am going to get a Mongoose if they can't get it done. Thanks

 

[John_C]

Would you mind checking mine? 1FTFW1ED1MFA61340
OTA updates stuck at 2.0 I have an appt with dealer on Thursday hopefully for BlueCruise but am going to get a Mongoose if they can't get it done. Thanks

Looks like you are currently pending an OTA update.

 

[jcaspar]

Thanks! I seem to be stuck here. Jan 2021 build. I got a few OTA updates but then stopped. Updated all modules about a month ago with a Nano and all went well but no OTA updates since. Will see what the dealer says on Thursday. Thanks again.

 

[JIMFOUNTAIN]

If you have access to wiring diagrams... I am looking into converting my Platinum FX4 (Hill Descent) into Trail control function. Specifically interested in the differences between the Hill Descent switch and the Trail control switch. Sample Tremor with 402 package is 1FTEW1E86NFA65853 if that helps. Sample Platinum with 701A and FX4 is 1FTFW1ED5MFB13052.

Thanks!

 

[John_C]

If you have access to wiring diagrams... I am looking into converting my Platinum FX4 (Hill Descent) into Trail control function. Specifically interested in the differences between the Hill Descent switch and the Trail control switch. Sample Tremor with 402 package is 1FTEW1E86NFA65853 if that helps. Sample Platinum with 701A and FX4 is 1FTFW1ED5MFB13052.

Thanks!

Can you clarify where the switches are located in either trim? Are these the steering wheel buttons on the tremor, vs the button over the sync 4 screen on the platinum?

 

[JIMFOUNTAIN]

Can you clarify where the switches are located in either trim? Are these the steering wheel buttons on the tremor, vs the button over the sync 4 screen on the platinum?

The switches are on the center console above the big screen. Either left or right of the emergency hazard switch.

 

[mflynndelta]

As the title states, I bought a 3 day license to FDRS to help with a retrofit I am doing. I already got what I needed from it, but I have 72 hours left on the license. If anybody needs wiring diagrams, part numbers, repair procedures, etc, let me know and I will see what I can do. I can also access vehicle histories (to see what dealers have done with FDRS while it was in for service), I can pull up what OTA updates you have/don't have (or ones that have failed), current recalls/TSBs, etc. Hit me!

would you mind callin up my History? Mine is still at teh dealer getting updates. 1FTFW1ED3MFB23739

 

[John_C]

would you mind callin up my History? Mine is still at teh dealer getting updates. 1FTFW1ED3MFB23739

I can see the dealer has been doing a LOT of updates on various modules, but it looks like the last message they got on it (late Friday morning) was that Bluecruise was not available (or there was a TSB regarding it). I don't know what this means, maybe it's nothing. That is just what it says.

 

[bkool2323]

if you would be so kind as to look at my current position , have been at 2.3 for a long time . 1FTFW1E84MKD78541 . thank you.

 

[John_C]

if you would be so kind as to look at my current position , have been at 2.3 for a long time . 1FTFW1E84MKD78541 . thank you.

You have a lot of available updates. I would have the dealer do them for you instead of waiting. You currently do not have any OTA updates pending.

 

[bkool2323]

John_c, thank you

 

[John_C]

If you have access to wiring diagrams... I am looking into converting my Platinum FX4 (Hill Descent) into Trail control function. Specifically interested in the differences between the Hill Descent switch and the Trail control switch. Sample Tremor with 402 package is 1FTEW1E86NFA65853 if that helps. Sample Platinum with 701A and FX4 is 1FTFW1ED5MFB13052.

Thanks!

Looks like the buttons are wired the same. It may be a simple software change, but I am not sure.

 

[Caneman88]

1FTFW1ED8MFA85585
thanks for your help I'm looking for where my updates are and if any waiting

 

[wilmaj32]

Hi John,
Could you please check mine. It was recently in for service for the Transmission Shutter and interested in what they checked... It's going back tomorrow. I'm also interested in the OTA's.
Thanks!
1FTFW1ED1MFB07197

Sponsored