2021 RCSB build

[Scrambler68]

@Scrambler68 Would you be able to get me the part number for the Fox shocks you installed? I've found a few part numbers online. I just want to be sure I get the correct ones for my RCSB.

the part number in the picture is what we used. I have extension brackets on my lower shock mounts. You may need a different one if you don’t have these brackets.

Sponsored

 

[Nando7057]

the part number in the picture is what we used. I have extension brackets on my lower shock mounts. You may need a different one if you don’t have these brackets.

Thank you sir.

I have the IHC ride quality kit installed like you. Were the brackets needed due to the length of the shock or the helper bag?

 

[Jmet8]

Hi which extension brackets did you use and could we get a few pictures?
thanks for your time.

 

[Scrambler68]

Hi which extension brackets did you use and could we get a few pictures?
thanks for your time.

I had a shop do the installation so I’m not sure, but I think the extensions came with either the rear flip kit or the helper bags. This is the only pic I have but I can get more later.

 

[Scrambler68]

Homecoming
So it was HoCo weekend before last. My wife was taking pictures of the girls in their dresses at the park. I slipped away to snap a couple of the truck!

 

[Rinn69]

@Scrambler68 -- Any chance for an exhaust video ? Maybe a couple revs, just to make sure the neighbors know it's you Thanks !
I've ordered a '24 in Carbonized Gray and plan to lower it 2/4......so I've taken one of your pics and have it on my computer "desktop", as inspiration, or more like a "fix" to tide me over for the next 4-6 months while I wait.

 

[Scrambler68]

@Scrambler68 -- Any chance for an exhaust video ? Maybe a couple revs, just to make sure the neighbors know it's you Thanks !
I've ordered a '24 in Carbonized Gray and plan to lower it 2/4......so I've taken one of your pics and have it on my computer "desktop", as inspiration, or more like a "fix" to tide me over for the next 4-6 months while I wait.

I tried to post a short video once before but it didn’t work. I’ll try again here:

 

[Ford Motor Company]

2 buckets + 2 fingers of bourbon = 1 clean truck. Cheers to your weekend!

Nothing better than a clean truck! Hope you are loving it.

 

[Rinn69]

Fair warning to anyone contemplating the Magnaflow kit, we didn’t find out until the time of install but their kit is designed for super crew cabs or regular cabs with 8’ beds. It is NOT designed for RCSB. My shop called Magnaflow to verify and they were like “yeah, we need to make that clearer.” To fix the problem, my shop had to cut off the flange and re weld it.

@Scrambler68 Is there any chance you could get a pic of where your shop cut the flange and re-welded it ? I was a weldor for a few years before I went into the USAF and have the stuff to weld stainless, so this should be a fairly easy mod. Thanks Scrambler !!!

 

[Scrambler68]

@Scrambler68 Is there any chance you could get a pic of where your shop cut the flange and re-welded it ? I was a weldor for a few years before I went into the USAF and have the stuff to weld stainless, so this should be a fairly easy mod. Thanks Scrambler !!!

The flange was completely removed. The exhaust now has a slip joint with a band clamp instead.

 

[joelle king]

Nice build ! Keep it up

snaptube vidmate​

 

[Scrambler68]

Took a road trip to Michigan for work this week. The snow was rolling in! Snapped a pic at the rest stop.

 

[Domsz]

Grille and badges!
The chrome on black front and rear badges came in today! So, I installed the Limited grille. One step closer to the look I’m going for!

Before:

grille removed:

grille shutters:

After:

Are those carbon fiber caps ? Do you mind providing the link ? World love to gather on my rcsb

Sponsored