‘22 Space White Lariat - 285/65/20 on Black Rhino Madagascar & Icon Coilovers

[AlxMlr]

Hey guys just wanted to share my setup.
Icon coilover - set around 2.3” level
285/65/20 Ridge Grappler on a Black Rhino Madagascar +30 offset. They sit about 20mm past the stock setup. Not a huge fan of big offsets anymore. I had these on a +12 and anything other than flat ground I would touch the crash bar. I did trim my valence at the cut, but only for aesthetics sake.

Anyhow, let me know what ya think!

Sponsored

 

[Graygoose2021]

Beautiful rig sir!!!

 

[Vin]

... I had these on a +12 and anything other than flat ground I would touch the crash bar. I did trim my valence at the cut, but only for aesthetics sake.

No crash bar rubbing with the +30, though?

 

[AlxMlr]

No crash bar rubbing with the +30, though?

none at all, I even threw a 5mm spacer on there for a +25 and I’ve still got a good half inch.
The ridge grapplers measure 34.8 x 11.6 too.

 

[Vin]

none at all, I even threw a 5mm spacer on there for a +25 and I’ve still got a good half inch.
The ridge grapplers measure 34.8 x 11.6 too.

Nice! Looks great without the big offsets.

 

[Joe_Lee]

Looks perfect

 

[Ryan74]

Awesome!

 

[SuperRaptor]

Very nice looking truck.

 

[Zyvin]

Nice! I’ve always like black rhino wheels.

 

[AlxMlr]

Nice! I’ve always like black rhino wheels.

I really like them, I found them for pretty cheap on FB and really wasn’t sure about the low offset, but have grown on me greatly. They only weigh 29 lbs which is a big plus! The whole combo weighs just over 90, which is fairly light for such an aggressive setup. Mileage seems to be around 14.5 ish.

 

[Vin]

... really wasn’t sure about the low offset, but have grown on me greatly.

The low offset IS what makes it look good and stand out from the run of the mill Bro-dozers. Can't be "custom" if it looks like everything else.

 

[S1N2W1N]

none at all, I even threw a 5mm spacer on there for a +25 and I’ve still got a good half inch.
The ridge grapplers measure 34.8 x 11.6 too.

Do you reckon a Michelin Defender 35x12.5/20’would work with your setup? I don’t mind trimming the valance. But nothing else.

 

[AlxMlr]

Do you reckon a Michelin Defender 35x12.5/20’would work with your setup? I don’t mind trimming the valance. But nothing else.

oh man you’d be very very close. That’s an extra half inch on either side of the tire. It would not work with my setup, as the inner sidewall would rub on the aftermarket control arm, but the stocks have more clearance.

 

[JerseyMike]

perfect setup, looks great!

 

[AlxMlr]

I’ve actually decided to sell the truck…I don’t owe anything g on it and have a couple investment opps I’m planning on using the $ for. Right after I got done setting it up!

Sponsored