Meterman
Well-known member
So I made the change and I’ve cycled the truck at least 10 times and also use the Power and >> to reboot the screen at least 10 times and still have the glitch.Ever wondered if you or a passenger wants to input the address while driving on the Ford Navigation screen but turns out you can't as Ford locked you out while the vehicle is in motion? Well thanks to @Livnitup, we finally can enable this feature! By using FORScan, you can enable this by changing the following steps and as ALWAYS, make a backup of the APIM module before attempting ANY changes so you can revert back to factory when needed:
APIM: 7D0-03-01 -> 5753 - xxx - xx-- (change only the bolded numbers only, leave the "x" alone).
Once you have changed this, you will see it will get a little glitchy at first 2-3 times of cycling on and off. Cycle the truck 3-5 times or until it goes back to normal and you're good to go; this is the only time you have to do this. You can now use the factory navigation screen keyboard while moving. Note; not all trucks will need to cycle more than 5 times. You can also do a hard reboot about 1-2 times if needed but not necessary. Press and hold the POWER button and the ">>" button together for a few seconds, let the APIM and screen reboot to splash screen then let go; you should be good to go.
*do at your own risk.
This mod currently works on the following models as of this posting:
-'21 and '22 F-150 XLT
-'21 and '22 F-150 Lariat
-'21 F-150 Platinum
DISCLAIMER:
Some 2021 and 2022 F-150 owners have reported that 911 Assist gets disabled after this mod is written to the truck. While some owners' trucks are different, please check and see if this option is disabled/disappeared on your Sync 4 screen (Settings, 911 Assist; will be in tile form). If it is disappeared, it's up to you if you'd want to keep 911 Assist. If you do, just revert your changes back from your back up. If you don't care for 911 Assist, no changes needed after FORScan mod has been written.
The 1st NAV screen has the glitch too but it does look correct after a minute but the words on the 1st screen at the bottom still are messed up. The search page doesn’t go back to normal.
Any other thoughts on getting it to look correct?
Sponsored