I’d have to pay for the harness too though. I’m seeing everyone so far with a 23 has everything but the clock spring. I still gotta double check mine however.
I get that. It was the only place I knew they were in stock.
I'm still confused. Do the 23's (most) just need the clockspring or the SCCM as well?Checked my23 Lariat. I do have the harness already. Connector plugged into a dummy port like others have seen. I do have voltage to the connector as well.
You should assume Sccm is needed, I haven’t seen anyone on any of the forums tackling the 23 delete note a 23 truck that was supposed to have a heated wheel that had the heat pins in the back of the unit.
I should be able to tackle this Saturday and I’ll give an update to everyone.
Any guidance would help me. I too got my clockspring off eBay. I have an aftermarket performance shop stuck cause they said they can’t get the new hvac controls to operate, meaning I don’t have heated or ventilated seats; nothing. I have a 21 digital version and a 22/23 without the digital gauges; same thing unless they plug my non heated hvac controller back in.
I would look at the software versions of both the HVAC and SCCM modules, as I would bet they needed updated to play nice with everything in your 23, especially if they came out of a 21 truck.
they’re both OEM new parts. Is that the issue? And if so, does that require FDRS? My tech verified the as built matches except for the adjustment for HSW
