PUTCO WORK BLADE LED BAR INSTALLATION

[NMfarmer97]

Anyone install a Putco WORK Blade on their F150? The installation instructions suck and there's nothing on the internet anywhere or YouTube.

Sponsored

 

[Framer]

Same here, just got mine delivered 2 days ago. 60inch. there is a tailgate bracket between tail gate & step. Anyone know if i can remove & get rid of the bracket?

 

[Fredm2002]

Curious to hear more about the install. Would love to get one, if better install instructions.

 

[Framer]

I just done installing my 60 inch blade. Wasn't easy to figure all those wire out. But i end up pay 72 hr subscription from motorcraft to get the wiring diagram of tail light.

I will attach the wiring diag

ram here. And take what you need. Just be sure to tap your light bar brown wire to Park wire, not Stop wire.

I did not take power from 7 pin trailer wiring, i just don't wanna squeeze myself into the wheel well to do the bridging. Instead, i run power from my Amp behind my backseat, and grounded to closest.

End result is super. It worth a try.

 

[Fredm2002]

Is there a youtube video to assist with installation??? Thanks, everyone!

 

[Severdog]

I just done installing my 60 inch blade. Wasn't easy to figure all those wire out. But i end up pay 72 hr subscription from motorcraft to get the wiring diagram of tail light.

I will attach the wiring diag

ram here. And take what you need. Just be sure to tap your light bar brown wire to Park wire, not Stop wire.

I did not take power from 7 pin trailer wiring, i just don't wanna squeeze myself into the wheel well to do the bridging. Instead, i run power from my Amp behind my backseat, and grounded to closest.

End result is super. It worth a try.

These connector diagrams....which connector is this diagram referring to? Is this the connector to the tail lamp assembly, or some other connector underneath the bed? Thanks

Sponsored