PLEASE HELP: Bambi Mode Backfired for me in FORScan

[Knickell]

Hey guys, I need to call on you for some help. I tried to enable "Bambi" mode on my F-150, and now my fog lights will not come on at all. The LED signature lighting works, but the full fog light will not.

Does anybody know the original code for the regular mode, so I can start new again?

I saved a profile before getting started. How do I reload that profile to the truck, or fix the fog lights to where they come back on with the proper coding? Has anyone else experienced this issue, and what was you fix?

I'm a little worried right now, so any help/fixes are truly appreciated.

Sponsored

 

[Knickell]

@Livnitup , maybe you have some insight? I know you complied the spreadsheet, I hope you can help me out!

 

[iceman77]

If you saved the BCM configuration before changing anything in ForScan, you can restore it easily. Just enter programming configuration for BCM, press "Load All" (at the bottom of your screen), browse for the saved configuration file, click Open then press "Write All". That should do it!

 

[Knickell]

If you saved the BCM configuration before changing anything in ForScan, you can restore it easily. Just enter programming configuration for BCM, press "Load All" (at the bottom of your screen), browse for the saved configuration file, click Open then press "Write All". That should do it!

I saved the OEM profile. I just could not figure out how to reload it. Is that what you're referring to?

I will have to try that later when I get home.

 

[iceman77]

I saved the OEM profile. I just could not figure out how to reload it. Is that what you're referring to?

I will have to try that later when I get home.

Yes

 

[Knickell]

That did not work so far. Do you happen to have the correct code to get the fog lights to come back on?

This is what I’m currently working with:

The code I found on the spreadsheet does not work for me.

 

[Ebrou]

This is mine which is from a XLT 302A. Not sure which package you have.

	726-39-01	0001	0000	0068
	726-39-02	0101	0000	006A

 

[Bocephus]

This is mine which is from a XLT 302A. Not sure which package you have.

	726-39-01	0001	0000	0068
	726-39-02	0101	0000	006A

Correct 726-39-02 above is the same as mine. Did you get it to work properly?

Sponsored