Add OEM bed lighting or something else?

[jeepin95]

I went with the OEM option as it was the same price as the Starkey and easier to install. Everything arrived today and I was able to get everything installed and working.

Sponsored

 

[y2kvfr]

1st post

I've just purchased a '23 XLT. It goes into the local shop tomorrow for a spray in liner.

Blue Betty replaces my 2010 XLT.

Has anyone successfully added the OEM cargo bed lights to a 23? I've verified the dummy plugs are there, so I imagine it would be the same parts.

TIA

 

[GypsyDanger]

1st post

I've just purchased a '23 XLT. It goes into the local shop tomorrow for a spray in liner.

Blue Betty replaces my 2010 XLT.

Has anyone successfully added the OEM cargo bed lights to a 23? I've verified the dummy plugs are there, so I imagine it would be the same parts.

TIA

Bumping this as well, i cant find the threads that have all the part #s and forscan changes needed.

If anyone has a link to the original thread id greatly appreciate it.

 

[grnsnake97]

ML3Z-14A411-F, ML3Z-14A411-D, FL3Z-9C888B, JL3Z-13A756A

These are the part numbers and Forscan changes I found in the original post

 

[VTR_16]

My truck is currently at the paint shop so I can’t look under it. Can anyone with a 2024 RCSB XL look under the bed and see if the plugs are there to add the OEM lighting?

 

[143lineman]

My truck is currently at the paint shop so I can’t look under it. Can anyone with a 2024 RCSB XL look under the bed and see if the plugs are there to add the OEM lighting?

Was wondering if you had plugs for oem light? I have a 24 lariat 501a and I don’t have any plugs for the lights by bumper on driver and passenger side like previous years.

 

[VTR_16]

Was wondering if you had plugs for oem light? I have a 24 lariat 501a and I don’t have any plugs for the lights by bumper on driver and passenger side like previous years.

I don’t either. It seems like it may be a zone lighting package that adds them but I could be wrong. At least that seems to be the case for the 21-23s. I ended up ordering these but haven’t installed them yet.

 

[franksfords]

my 23 XL has the connectors. one on each side of truck. hope to add OEM cables and lights and dive into Forscan and make them work.

 

[rmr76]

Just for reference for others, I did this to my 23 Lariat 3.5EB FX4 501A today and it worked just fine. In my case the 726-71-01 setting was already done. I changed the other 3 settings in Forscan as noted earlier in the thread.

Sponsored