2021+ F-150 FORScan List / Database / Spreadsheet ?

[Nightshade]

Yeah, I'm ignorant on the difference between the B&O Unleashed and the normal B&O systems besides I know the Unleashed has like 18 speakers.

Really isn't much better than the other honestly, I have the B&O Unleashed in my '22 Lariat and had a '21 Lariat with a normal B&O, still sounds almost the same to me.

Sponsored

 

[eww7633]

Cams in motion enabled is Power-Up update 2.5.1. You still have to wait for this version. I'm still waiting for this before I have to take it to the dealer to force it.

I appreciate the reply. If that is the case, then why is there a way to enable it in Forscan? I’m not sure why that would be an option if it didn’t work prior to that update.
Thanks!

 

[Who are you]

Some of the changes aren’t seen in the non-asbuilt interface, hence why you need to change it the asbuilt way. For example, let’s say you want to enable “Enable Cameras at any Speed” modification, you’ll see there’s 2 modules you that you’ll need to change in order for it to work; non-asbuilt won’t show this in there so you have to do the work to get it enabled. Same thing as adding auto heat & cool seats mod, requires you to change 2 modules as shown on the forscan spreadsheet to get it, won’t show in the non-asbuilt area at all either.

As always, back up the modules you’re changing at all times, that way you can revert back to factory asbuilt if you run into issues.

I just checked mine and i must have a new version and the OTA update hit. My cameras are enabled at speed already and the non as built interface looks like i can enable/ disable as i want for each camera.

Probably going to change it to the 50/50 view at speed as that isnt currently enabled.

 

[Nightshade]

I just checked mine and i must have a new version and the OTA update hit. My cameras are enabled at speed already and the non as built interface looks like i can enable/ disable as i want for each camera.

Probably going to change it to the 50/50 view at speed as that isnt currently enabled.

Thats awesome! I’m still waiting for that update to hit mine but so far no one I know up here in Canada has it yet, so far! It’s frustrating but oh well!

 

[Nightshade]

I appreciate the reply. If that is the case, then why is there a way to enable it in Forscan? I’m not sure why that would be an option if it didn’t work prior to that update.
Thanks!

You can only enable certain cameras by FORScan, it won’t let you use all the cameras at all. If you have a job 1 truck (2021), you only get the hitch and bed cam, that’s it. With the new OTA Power-Up update, you can use all the cameras. This update is what everyone’s waiting for but Ford, for some reason, is super slow pushing them.

 

[eww7633]

You can only enable certain cameras by FORScan, it won’t let you use all the cameras at all. If you have a job 1 truck (2021), you only get the hitch and bed cam, that’s it. With the new OTA Power-Up update, you can use all the cameras. This update is what everyone’s waiting for but Ford, for some reason, is super slow pushing them.

Ok, I’m with you. My issue is that I only get hitch and bed cams at speed in reverse, not in drive after making the changes with Forscan. I don’t think that is what is intended, right?

 

[scott011422]

Apparently from reading up after making my comment, seems @ROBB1 has commented a while back saying the following needs to be changed, to another member for engine audio enhancement (fake engine noise):


ACM: 727-04-01 xxxx **xx xx

01 is the 3.5l ecoboost
00 is the V8 (no enhancement)
07 is the 2.7l ecoboost


Wanted to see if someone actually did this yet and if the above are the correct values?

It is in the cab from the speakers. The idea is to make the turbo engines sound like a V8 to the driver. It was one of the first things I disabled in my truck.

To disable:
ACM:
727-01-01 xxxx xxxx 0x—
Your OEM will be a 1 in this position if it is active in your vehicle. 0 deactivates.

Do we know which of these work yet? Has anyone done this?

 

[ROBB1]

Do we know which of these work yet? Has anyone done this?

Is your goal to turn it off or tinker with the sound output?

This works 100% I did this week one of ownership:
To disable (only change required):
ACM:
727-01-01 xxxx xxxx 0x—

 

[scott011422]

I would just be turning it off.

Is your goal to turn it off or tinker with the sound output?

This works 100% I did this week one of ownership:
To disable (only change required):
ACM:
727-01-01 xxxx xxxx 0x—

I would just be turning it off

 

[Nightshade]

I would just be turning it off.


I would just be turning it off

Turning it off would be as what @ROBB1 said:

ACM:
727-01-01 xxxx xxxx 0x--

 

[powerboatr]

lets talk glare free setting for headlights (LEDS)
i have auto high beams, and it seems we can switch to glare free. which lone of code needs adjusting thanks

 

[GrandpaD]

lets talk glare free setting for headlights (LEDS)
i have auto high beams, and it seems we can switch to glare free. which lone of code needs adjusting thanks

Here's a thread on it. Good luck. It appears (if I read correctly) '22 job 2 vehicles might be missing some hardware for them to work properly.

 

[ronaldfreemanjr]

lets talk glare free setting for headlights (LEDS)
i have auto high beams, and it seems we can switch to glare free. which lone of code needs adjusting thanks

This is from the thread mentioned above. It worked for me 2021 job 1 and glare free headlights are functional.

Glare Free Menu (replaces Auto High beam) in APIM:
7D0-09-01 x1xx xxxx
7D0-09-03 xxCx xxxx
Note: a module reset in FORScan or power cycle is required for the menu to appear.

IPMA
706-01-01 xxxx xxx9

SCCM
724-04-01 xxx4 xxxx

IPC
720-01-01 xx8x xxxx
720-10-01 xxxx xxx3

HCM
734-01-01 xxxx xx01
734-01-02 x3xx xxxx

Short bed No onboard scales / ccd
734-01-04 xx53 4E

Short bed with scales / ccd or Raptor
734-01-04 xx56 D1

Long bed no scales / ccd
734-01-04 xxD9 88

Long bed with scales / ccd
734-01-04 xxDC 17

 

[Who are you]

Is anyone else drive type defaulted to 4 auto in the module?

selector shows 2wd but it seems like the module should be on select 4x4 instead of auto

I've been having mpg issues and wondering if this is an anomaly

 

[CBGray]

reset your APIM module in FORscan

This was the key piece of info I was missing yesterday as well, so thanks for posting it! After doing the Cameras at Speed, nothing had changed, even though I was Power Up 2.1.1 and 21281 Rev 244. I tried again today, but this time adding the reset step from the Tools menu, and now it works perfectly.

Sponsored