2020 bed cover fit 2023?

[Espi5.0]

Wanted to get some feedback from everyone on whether this bed cover would fit on my 2023 SCREW F150. Says its for 2015-2020 but has the bed really changed? Reason I am asking is I found a brand new one locally for less than half off for this model. There are different part numbers for the 2021 - 2023 cover but not sure if that means there are any significant differences that would cause the 2015 - 2020 model not to fit.

Amazon.com: Gator EFX Hard Tri-Fold Truck Bed Tonneau Cover | GC24019 | Fits 2015 - 2020 Ford F-150 5' 7" Bed (67.1") : Automotive

Sponsored

 

[Espi5.0]

For clarification here - my bed is the 5'7 as well, its just the difference in generations that seems to be the issue (if at all).

 

[oncechance]

I had a Gator on my 2014 and took off and put on my 2022. Fit just fine.

 

[Espi5.0]

Nice - thanks

 

[SingleSpeed427]

A quick Google search will reveal lots of posts about this (on various forums too).

Simply put... I plan on putting my "old" 2016 Ford Factory soft tonneau (that I used on my 2016 and 2018) on my 2024 when it arrives. Unless there's a difference from 2023 to 2024, it "should" fit (based on what I've read).

Now... if you are going for one of those ones that go "between" the bed sides (like a flush mount or roll-up, I would be less confident about.

 

[gh8toes]

Same here, I took the soft cover from my 2015 and put it on my 2019. Took it off the 2019 yesterday and plan to put it on my 2024 whenever a car hauler gets around to picking it up and delivering to my dealer, it's been a week now waiting to be picked up. I just had to order a new piece of weather strip for the front of the box where the cover meets the cab.

 

[redline]

I thought i read some where the rails for a tri fold are slightly different but work.

 

[{tpc}]

I've been using my same bakflip cover since I had my 2018. The only issue I have had is the drop in liner mold has become cheaper and less form fitting since then, so I've had to trim a little more away to get it to fit well.

 

[Baz]

I had BAK revolver X2 on my 2020 F150 and I put it on my 2022 F150 with no issues. I did get in touch with BAK about why there were two different part numbers for 2015-2020 and 2021-2024. Their response was that they are the exact same but Ford wanted a new part number issued for the 21-24, so BAK followed suit. BAK makes the Ford hard rollup cover with Ford logo

Sponsored