tjarvis22
Active member
- Thread starter
- #1
I’m going to put some Morimoto pivot Switchback strips behind the fender badges. I just put an illuminated front emblem on yesterday and when I looked up where to wire it, I noticed there aren’t any dedicated fuses for turn signals.
I was curious where you guys would recommend tapping in for the turn signals on the switchbacks. I am very weary of doing a wire tap into the actual turn signal wire of the headlight, just because of all the computers and such.
Thanks
I was curious where you guys would recommend tapping in for the turn signals on the switchbacks. I am very weary of doing a wire tap into the actual turn signal wire of the headlight, just because of all the computers and such.
Thanks
Sponsored