My 2021 F150 build: 20" Fuel Wheels, Toyo Open Country, 2.5" level, 3/4" rear lift + more

[jwinthro]

1. I used the 2.25 in ReadyLift Kit for the Leveling
2. Custom paint was don by Allyz Auto in Orlando, FL. I did the swap myself. It’s a very easy job, took me 30min
3. I had the 35’s originals installed on the stock wheels (here is a pic) and with the leveling kit, stock wheels and 35’s there’s no trimming needed at all. If you do 33-34 you’ll be more than fine.

Thanks!

I really like the grill and emblems. Was that a youtube tutorial, or even simpler?

I am probably going to do a full suspension upgrade to stiffen up the ride but will probably wait until I get some miles and figure out what I really want.

Great looking truck.

Sponsored

 

[Kaipo]

Wow, this is great. I just ordered my 2022 Carbonized Gray Lariat FX4 but with the "blackout" package or whatever they call it now. So I imagine mine will look pretty darn similar to this. Confirms I made the right choice. A couple questions:

1. What level kit did you go with?
2. Who did the custom paint? That looks fantastic. Did you go through them for the grill swap too?
3. Do you think you could get away with no trimming by going to a 33 or 34" tire?

Look up real deal Neal wild willies customs (Akins ford) on YouTube, they have done plenty of trucks with 34s and levels with no cutting

 

[Jaimef150]

For me, being able to fit into parking garages, drive-thrus, accessibility of the truck for family and kids, gas mileage, etc are all important for a daily driver in the City and are hindered by a big lift. I have had two trucks with 6" lifts and 37s and for me, they proved a bit much for a daily driver. I got tired of having to park across the street in the grocery store parking lot because I couldn't fit in the kids school parking lot - LOL.

Much appreciated feedback since this is my daily driver..
Thank you!!

 

[Stage3Motorsports]

Look killer!

 

[SpaceWhiteF150]

2021 f150 Lariat Sport Carbonized Gray
20x9 1 offset Fuel Rebel 6 rims
35x12.50 Toyo Open Country A/T III'S
2.5" Leveling kit
3/4" lift in the back
Custom painted blackout side emblems
Custom painted blackout OEM Platinum front grill
K&N Intake System
19+ MPG's before 15+ MPG's after
Ford Bedliner
Backflip bedcover
Ford OEM bed divider

Thinking about doing a 4" lift or a 6" lift would appreciate your comments

What trailer hitch is on the back? B and W? How do you like the look of the Toyo AT3s? How did you add 3/4in in the back? Thanks in advance!

 

[SpaceWhiteF150]

The only thing your truck needs is rear wheel well liners!

 

[dave91gt]

Absolutely perfect stance. Well done!

 

[Jaimef150]

The only thing your truck needs is rear wheel well liners!

Agree, I'm installing those next week.

 

[dave91gt]

I'm on the fence between a 2" front only and a 2.5" with 3/4 rear. Auto spring sells a combo kit. Your truck just made my decision I think. Stock I have 3" rake.

 

[Jaimef150]

Thanks!

I really like the grill and emblems. Was that a youtube tutorial, or even simpler?

I am probably going to do a full suspension upgrade to stiffen up the ride but will probably wait until I get some miles and figure out what I really want.

Great looking truck.

There are a few tutorials on Youtube that makes it very simple to do. It's a very simple job

 

[Jaimef150]

I love the look and ride of the Toyo AT3s... in the back we replaced the 1 1/4" block to 2". no need to replace the shocks. Trailer Hitch is a B and W

 

[Jaimef150]

Absolutely perfect stance. Well done!

Thank you!

 

[Jaimef150]

I'm on the fence between a 2" front only and a 2.5" with 3/4 rear. Auto spring sells a combo kit. Your truck just made my decision I think. Stock I have 3" rake.

go for it

 

[Northern Goat]

There are a few tutorials on Youtube that makes it very simple to do. It's a very simple job

Were you able to get the grill emblem off without removing the grill?

 

[Jaimef150]

Were you able to get the grill emblem off without removing the grill?

No, the emblem is attached to the grill with 3 screws and you'll need to disassemble the grill to get the emblem off.

Sponsored