Glarefree with Projector swap

[OleMustyBag]

I have done the XLT quad LED to projector swap with a harness and HCM the Highs and lows work. The headlight are Raptor projectors. I inputted the glarefree settings from the forscan spreadsheet and glarefree does not work. The glarefree toggle is showing in the radio menu. I do not get the green auto headlight symbol in the Cluster, I don’t get any auto headlight symbol in the cluster. Just wondering if glarefree will work at all in this aftermarket style scenario? Has anyone had Glarefree work in this application? Also I am getting a couple trouble codes from the headlights B1D64 and B1D65. Not sure if that has something to do with it or not.
Thanks in advance for the community help!

Sponsored

 

[Eighthtry]

I hope you can get some help. The questions read like some of my projects.

 

[JScaro]

@OleMustyBag
Check you ForScan settings. Attached is my sheet for reference.
Do you have the level sensors?
What does ForScan reference those DTC codes errors as?

 

[OleMustyBag]

@OleMustyBag
Check you ForScan settings. Attached is my sheet for reference.
Do you have the level sensors?
What does ForScan reference those DTC codes errors as?

I do not have level sensors yet. I want to add them but have not yet. I inputted the values in that sheet but still have some codes.
-B1D64 Left Headlamp Swiveling Motor
-B1D65 Right Headlamp Swiveling motor
-U2101 HCM Controll module configuration incompatible

I have also changed out my IPC to the Raptor digital cluster not sure if that has anything to do with my problems.

Sponsored