11/24 but I learned it wasn’t only waiting for a chip and it was finished in the 12/20 week.So what was your final blend date on your sticker?
Thanks for that link - I've not used the My View setting - is that something that can be disabled if it causes issues (like your black screen and such)? Given your (and others) issue with it, I'd not want to set mine up, have the issue, and then not be able to reset it.so I found a thread for my My View reset.
https://www.f150gen14.com/forum/threads/myview-resetting-very-often.2869/
Gotcha - When do you finally pick it up? Also - I can add you to the tracker here if you want and you send me your info for it.11/24 but I learned it wasn’t only waiting for a chip and it was finished in the 12/20 week.
User Name | Dest | Plant | Trim | Ordered | Build/Built | Shipped | Del ETA | Delivered | Picked Up |
effjoeb_iden | MI | DRB | XLT | 10/4 | 12/15 | 12/20 | X |
Thanks for that link - I've not used the My View setting - is that something that can be disabled if it causes issues (like your black screen and such)? Given your (and others) issue with it, I'd not want to set mine up, have the issue, and then not be able to reset it.
So by what I’ve seen and read their is no disable feature in gauge cluster. It’s ok to just go in and put your screen back to the way you had it especially if you only add or change a few things but it’s just the point that you have to do it.
Good question - did you order anything that was outside of Ford's normal setup? (Regular cab/short bed, snow plow , HDPP, etc.)Called ford again this week, still giving me a 5/17 complete date, wtf! How are trucks in March build weeks being completed before mine?
I didn’t add much to the truck really this is my stickerGood question - did you order anything that was outside of Ford's normal setup? (Regular cab/short bed, snow plow , HDPP, etc.)
Apparently the only thing holding it up is a wiper motorSo I have no idea why that build would be held up unless you were unlucky and had a particular part/option not being available as yours was being built. The bad thing being that Ford is not communicating the specific reasons for each truck being held other than to give an ETA 2-3 months out.
Some folks have found names and contact info of a random Ford rep here or there via Facebook or Linkedin and contacted them directly and that seemed to help in their cases - but others have reported no discernable help. This is just one big mess all around.
Seriously? Wow...Apparently the only thing holding it up is a wiper motor
Thanks Josh - did you get an email or something on the recall? I checked my FordPass app and had not received a notice.Just to let everyone know their is a recall for the trailer brake control module. I scheduled to have the recall done next Tuesday. It’s just a reprogram of the module.
I also ordered the “flush style” tremor rock/stone deflectors for the rear.
I received it through the ford pass app. It was a notice at the top of the app when I opened it.Thanks Josh - did you get an email or something on the recall? I checked my FordPass app and had not received a notice.
Do you have a pic/link of the deflectors? I got mud flaps and hadn't heard of these.