nice, someone that did 3d printing and had free time, could make something like that , that goes around the pin and goes up into the clip to hold it all steady, could sell it to BAK.
that said, i went with 3m double sided tape on the new corners, has held up so far
i just got a set of the Falken D1s installed, wanted an 8 ply due to camper pulling. hour trip back home, seemed great, they look a tad bigger than stock even though the same size, maybe a whisper more road noise, but wife said not.. , so couldn't be much more than stock if any.
I have an upcoming camp trip that started this whole wheel/tire shopping conundrum (wanted a little heavier tire) . I ended up being the "repsonsible me" and decided to just go with tires for now on the stock Lariat rims. thanks for everyones input.. i'll still keep an eye out.
thanks for the pics, hard to get a real visual from just a wheel picture, that gray looks better than i thought it would.
was looking at this, maybe with chrome lugs 20x9.. but still looking
been searching off and on for a couple days, looks like all the other colors are covered.
Chrome? idk, the machined or iridium look maybe.. black, maybe but not sure it'd look good with what little chrome trim is there. Shelby CS45s caught my eye, but not sure 22's would be a good tow tire...
tools needed are a small torx bit , the same that are on the bottom of the new antenna,. I used a drill press to enlarge the hole that the antenna wire runs thru, enough that you can get the connector thru the hole. connect the blue connectors in the roof , tape it oriented the same way on top...
i had luck with the xm dealer app to get mine initially activated, have yet to call as im still on the trial period. im hoping that gets the radio id in the sirius system to make things a little easier when calling.
Feels like i got lucky, gal at BAK is sending me some replacements since they aren't available for purchase yet.. thanks for the replies
I'm still likely to go with some sort of adhesive on the replacement, leaning toward some double sided tape, they just feel a little loose, and i don't want...
A good news, bad news problem. I picked up a brand new Revolver tonneau from a guy on CL, however unboxing it, found a broken rear plastic corner cap, and am suspecting it'll be a PIA to get a replacement from BAK. Do not even see it on their site as a part i can buy.
Looking at the other...
ok, mine had the heated wheel delete, and no power tilt/tele , if i'm understanding correctly, they also deleted the power tilt/tele in the process. ,
it looks like there is an A version, was hoping that would be for the manual tilt/tele, but afraid to gamble on it.
Is going thru the top the best option to get to the XM Fakra plug? I did this without pulling the bolts to the apim , and am not sure i could do it again. I intend to upgrade my "temp" antenna since i made it thru the "proof of concept" stage, and now will probably need to release the little...