What did you do TO your F-150 today? 🙋🏻‍♂️

[powerboatr]

I got a Fumoto valve to replace the drain plug so I can use a hose. The plug looks a bit away from where the covered hole is. I guess it depends on the engine too.

i let dealer do the oil changes on our vehicles because oil disposal is tricky here.
places that sell it are required to take in old oil...but they pitch a bitch

Sponsored

 

[waitingforbigred]

Installed LED license plate lamps, builtright rear seat release, and the builtright dash mount pro. Dash mount was kind of a pain in the ass, but its sturdy as hell.

Tried to install the Amp Research bedstep, but I cannot get the two piece bracket put together for the life of me. I'm almost convinced one of the two pieces is either the incorrect one or is not bent correctly. Trying to get an exchange through the retailer, Amp Research was pretty unhelpful on the phone to be honest.

 

[Kodiak]

Your Ford F-150® pickup has more going for it than just power – it’s intelligent, too. Join us on May 26 at 2 p.m. ET to have your most pressing questions about your new truck answered as we cover some of the must-know tech and features, like SYNC® 4 and Ford Co-Pilot360™ Technology.  


Click the link below to join us!
https://livestream.ford.com/f150

Thanks for posting this and the link.

 

[RedStorm]

Vinyl wrapped the front bumper and wrapped(tinted) the fog lights. Initially thought I could get the bumper off without pulling the grill, but no dice. Had to blow it all apart. Hoping to knock the headlights and taillights out this next weekend.

 

[jaggah]

the other day put on the ford splash guards and wheel well liners
today i modified my super duty front license plate holder to move the front plate on the 150 to a lower position out of the way of the BIG air hole for the intercooler. no pics on it yet, waiting for paint to dry on some stand offs
yes the snakes keep the birds off

Pic of the license plate relocate?

 

[powerboatr]

Pic of the license plate relocate?

i used a 2021 super duty front lic plate holder and cut off the long ears and left the short ones on to stablilze the holder . then i ran new machine screws through the lower pieces with locknits. it might not effect air to the coolers, but it cant hurt imo

 

[powerboatr]

Vinyl wrapped the front bumper and wrapped(tinted) the fog lights. Initially thought I could get the bumper off without pulling the grill, but no dice. Had to blow it all apart. Hoping to knock the headlights and taillights out this next weekend.

i swear the 21 and 22 trucks look so much different from slight angle changes. one day it looks squished , then the next it saying GOT CHA
looks awesome

 

[jaggah]

i used a 2021 super duty front lic plate holder and cut off the long ears and left the short ones on to stablilze the holder . then i ran new machine screws through the lower pieces with locknits. it might not effect air to the coolers, but it cant hurt imo

I'm not sure I understand. Did you have to drill new holes?

 

[powerboatr]

I'm not sure I understand. Did you have to drill new holes?

yes small 10/32 holes in the plastic uprights . the phillips machine screws on the holder.
i was going to put it on the air dam like i had on my recently sold super duty, but it hung to low and i already got pulled over once before on the super duty before i put on the front hitch and then the plate went on it

 

[ProperCrab]

Got the wife's Crew Cab looking better, Belltech D3 kit installed with IHC helper bags in the rear.

 

[Blue22]

Got the wife's Crew Cab looking better, Belltech D3 kit installed with IHC helper bags in the rear.

I'm more into lifted trucks with aggressive off road tires but that looks really nice especially with the gloss black STX grille and wheels. Do you have any other plans for it?

 

[powerboatr]

Got the wife's Crew Cab looking better, Belltech D3 kit installed with IHC helper bags in the rear.

bucc ees
and truck looks killer with that stance

 

[ProperCrab]

I'm more into lifted trucks with aggressive off road tires but that looks really nice especially with the gloss black STX grille and wheels. Do you have any other plans for it?

Nothing major, she wants an exhaust so we will prob go with a Corsa like my RCSB and paint matching a few items.

 

[ProperCrab]

bucc ees
and truck looks killer with that stance

Bucees has the best photo lighting at night lol.

 

[powerboatr]

Bucees has the best photo lighting at night lol.

yep you know it and cleanest lanes and great chow

Sponsored