Upfitter Switch installation

[billp9]

That looks nice!!!!

Sponsored

 

[AbdAlrahman9989]

I did the aux beam switch panel. Seems like a much more cost effective route. They offer 6 gang and 8 gang. I’m currently working on a 3D printed bracket to hold the switch panel inside the sunglasses holder!

Regarding auxbeam 6 gang does the wiring happen via the driver firewall ?
I bought one and I'm afraid that the wire will not be enough

 

[SpaceWhiteF150]

Regarding auxbeam 6 gang does the wiring happen via the driver firewall ?
I bought one and I'm afraid that the wire will not be enough

I routed mine through the drivers side. I did purchase the extension they sell, that got me to the perfect length!

 

[Madtown]

For what it's worth, I gave up on the upfitter install on my Powerboost. Just not a good place to put the relay/fuse box in the engine compartment. If I had a non-Powerboostt this would be a great solution. I put an add in the Forum for the sale of the complete kit.

 

[Mszczewski]

For what it's worth, I gave up on the upfitter install on my Powerboost. Just not a good place to put the relay/fuse box in the engine compartment. If I had a non-Powerboostt this would be a great solution. I put an add in the Forum for the sale of the complete kit.

I was thinking about this in the future on my powerboost. What was in the way?

 

[BAPP702]

I was thinking about this in the future on my powerboost. What was in the way?

I was working on mine last night and it is tight under there with the cooling system for the electric motor. I have the harness all ran and the console installed but its going to be a tight squeeze.

 

[Mszczewski]

I was working on mine last night and it is tight under there with the cooling system for the electric motor. I have the harness all ran and the console installed but its going to be a tight squeeze.

Any pictures you are willing to share would be appreciated.

 

[BAPP702]

Any pictures you are willing to share would be appreciated.

Pictures of where I am mounting the relay box? I can take some when I figure out what I am doing. I will need to design something.

 

[TJSparky]

Are people getting the GreyBoosted upfitter harnesses? I bought mine 2 weeks ago (mid april) and it still hasn’t shipped. No replies via email either.

 

[billp9]

Are people getting the GreyBoosted upfitter harnesses? I bought mine 2 weeks ago (mid april) and it still hasn’t shipped. No replies via email either.

I made my own harness. It wasn't that difficult and way cheaper.

 

[billp9]

I made my own harness. It was that difficult and way cheaper.

Sorry it wasn't that difficult

 

[SumGuy]

Are people getting the GreyBoosted upfitter harnesses? I bought mine 2 weeks ago (mid april) and it still hasn’t shipped. No replies via email either.

It takes him a bit to ship. He is a really small shop, but the quality is superb. Worth the wait.

 

[Beatrocker248]

I made my own harness. It was that difficult and way cheaper.

Would you happen to have a list for the extra fuses you had to buy plus the wire connectors and pins you used and a diagram of how you wired them? I'm about to start on mine but since I don't have the power rear window nor the air refresher, it'll just be the regular overhead console with the OEM switches so hopefully much easier. Saw the rest of the list and much appreciate it, will try to replicate same way.

 

[billp9]

Here is what I did. I am going to list this in pieces. ( its easier for me). ps as they all say this is for entertainment only.
Wire connectors ordered from digi-key

QUICK VIEW WM9431-ND 0334721206 CONN RCPT HSG 12POS 3.50MM	3/15/2024	1	0	$3.21000	$3.21
2	QUICK VIEW WM3692CT-ND 0330122003 CONN SOCKET 22AWG CRIMP TIN	3/15/2024	24	0	$0.10900	$2.62
3	QUICK VIEW WM14549-ND 0347290120 CONN RCPT HSG 12POS 2.54MM	3/15/2024	1	0	$1.23000	$1.23
4	QUICK VIEW WM16153CT-ND 0348033211 CONN SOCKET 22AWG CRIMP TIN	3/15/2024	24	0	$0.04500	$1.08

I always order extra pins just in case.

 

[billp9]

relay box,

Sponsored