Tried 295/60/20 with 2" level..no luck

[Elkhunter]

Tried the Hancock At2 with no luck, they rubbed the crash bars ?

Sponsored

 

[Elkhunter]

 

[oddlou]

Which leveling kit and what size wheel and offset did you go with? Are those Fuel Rebels?

 

[Elkhunter]

Which leveling kit and what size wheel and offset did you go with? Are those Fuel Rebels?

Ready lift 2" , blitz wheels with +1 off set. 20x9 Yes, the same wheel tireguy has. I think the offset will limit my choices.

Bummer cause it looked good....for 2 minutes

 

[oddlou]

Yes, looked good! I was considering that size wheel (Fuel Sledge) and that size BFG KO2 (or maybe a 285/65/20). I'll probably go with the Falcon tow/haul kit, which is a 2.25. I wonder if the 1/4 inch will be enough. Maybe I'll have to stick to the stock wheel.

 

[Elkhunter]

Yes, looked good! I was considering that size wheel (Fuel Sledge) and that size BFG KO2 (or maybe a 285/65/20). I'll probably go with the Falcon tow/haul kit, which is a 2.25. I wonder if the 1/4 inch will be enough. Maybe I'll have to stick to the stock wheel.

I think its the offset that is the biggest problem. If you go 2.25 the distance doesn't change much from the Inner fender to the front bumper/valance. If it set out more then it would change a bunch of things. I know some guys take the crash bars off, I personally like safety features but when I was a bit younger I wouldn't think twice about it.

 

[oddlou]

I'm with you. I'm not looking to take anything off or cut anything.

 

[Elkhunter]

I'm with you. I'm not looking to take anything off or cut anything.

I decided to get the wheels and keep the factory tires for a bit. Probably going 285/60/20

 

[zdjelar]

Pretty sure a number of folks with +20mm offsets are clearing easily with 295/60R20’s. I certainly hope so because I’ve ordered Fuel Covert’s with +20mm and Nitto Ridge Grappler’s in 295/60R20’s. Oh and I’m getting ReadyLift 2 inch level (specific for 21s) put on by dealership.

 

[Elkhunter]

Pretty sure a number of folks with +20mm offsets are clearing easily with 295/60R20’s. I certainly hope so because I’ve ordered Fuel Covert’s with +20mm and Nitto Ridge Grappler’s in 295/60R20’s. Oh and I’m getting ReadyLift 2 inch level (specific for 21s) put on by dealership.

I did the same leveling kit. Keep me posted if your set up works!!

 

[Roadking71865]

Pretty sure a number of folks with +20mm offsets are clearing easily with 295/60R20’s. I certainly hope so because I’ve ordered Fuel Covert’s with +20mm and Nitto Ridge Grappler’s in 295/60R20’s. Oh and I’m getting ReadyLift 2 inch level (specific for 21s) put on by dealership.

Any news on your setup?

 

[zdjelar]

Any news on your setup?

Haven’t gotten the vehicle yet. Should be some time in the next week, perhaps even this weekend.

 

[Smroepe]

Seems like ReadyLift is the popular leveling kit on this forum. Any reason why? I’m looking at Fuel Vapors +2mm offset and 275/60/20 ridge grapplers.

 

[Asphaltman]

Seems like ReadyLift is the popular leveling kit on this forum. Any reason why? I’m looking at Fuel Vapors +2mm offset and 275/60/20 ridge grapplers.

They were one of the first with a kit specific to the ‘21’s. Also the puck includes additional components to make the alignment easier. I went that way because so many here had already installed and tested it. I also didn’t want to mess up the tech of the truck by making a ‘20 kit “fit”. So far driving is a dream. I should get my wheels and tires this week, so I can advise further then. My decision was between the Ready Lift and the Fox 2.0 coil overs. Didn’t want to spend the cash on those, so ready lift it was. Maybe more of the suspension companies will figure out their kits adapting to the ride height sensors and bring more options to market.

 

[Saxt15]

Ready lift 2" , blitz wheels with +1 off set. 20x9 Yes, the same wheel tireguy has. I think the offset will limit my choices.

Bummer cause it looked good....for 2 minutes

How much did they stick out of the fender? I have 1+ offset 20x9's on the way, and will be putting 285/60R20's on...

Sponsored