Tremor wheels and tires on non Tremor truck.

[Jeffgmc]

Anybody put new tremor wheels on their STX, XLT or Lariat truck?

Sponsored

 

[tre_77]

I just bought a set of tremor take off tires. Just waiting for my Stx to arrive now

 

[Billy231]

Anyone get to try this set up yet ? interested in the same.

 

[Jeffgmc]

Here ya go

 

[Jeffgmc]

Anyone get to try this set up yet ? interested in the same.

I put Tremor wheels on my truck. I also did some 1/4” rough country spacers.

 

[Billy231]

Nice Jeff!
I like it.. Any chance you have a side view?
What else did you do for leveling? I am considering swapping the Tremor spring/shock set up as well. Think that would get me near 1.5-2" on my Non-FX4 suspension.

 

[Jeffgmc]

Nice Jeff!
I like it.. Any chance you have a side view?
What else did you do for leveling? I am considering swapping the Tremor spring/shock set up as well. Think that would get me near 1.5-2" on my Non-FX4 suspension.

Billy, Thanks. ldid a 2 inch level also. I’m pretty happy with everything so far.
Jeff

 

[Fredm2002]

What brand of tires is those? Thanks, Fredm2002

 

[Jeffgmc]

What brand of tires is those? Thanks, Fredm2002

They are General Grabbers that come on the Tremor

 

[Billy231]

Thanks Jeff, I appreciate the posts, it looks great. I located all the items needed to do similar as I mentioned. I need to locate some Tremor steps yet. The chrome has to go as well as my bumpers.

 

[tossty]

Nice setup and looking good

 

[Rocca]

Here ya go

Is it necessary to lift the truck in order to fit these? I am waiting for my XLT and didn’t want to lift. Not sure with the offset of these rims if they will rub on a factory XLT.

 

[Jeffgmc]

You don’t have to lift the truck but it does look much better leveled.

 

[Jeffgmc]

Is it necessary to lift the truck in order to fit these? I am waiting for my XLT and didn’t want to lift. Not sure with the offset of these rims if they will rub on a factory XLT.

You don’t have to lift the truck but it does look much better leveled. This is the truck without the 2” level

 

[Billy231]

Finally got a few pics to share. Installed Tremor front spring/strut, rear shocks and take off wheels tires. After alignment and remeasuring, the Tremor suspension swap from a Non-FX4 Lariat, yielded approximately 3/4” and by adding the 33” Generals over the 32” Wranglers I gained another 1/2” there, overall it’s a measly 1.25”. Haha, although it is noticeable to me in looks, I opted to leave the rear Lariat blocks installed and not use the 2” blocks for now. The ride is better in the front with less body roll and bounce is reduced. The rear still needs a mild shock upgrade to be tamed a bit. I’m happy with it for now, and the highway ride is much improved with the complete set up, especially here in NY, with craters all over the roads. Also added the Tremor steps from a local sale. Big improvement over the chrome. No slipping off anymore when wet. Also, for those interested, by this swap to a more aggressive tread, my hand calculations have shown about -2 MPG loss highway driving.

Sponsored