Successfully updated 2022 Platinum PB to BlueCruise 1.4 -- DIY steps

[buuuhler]

No it's definitely not, at least not in southern California traffic

Sponsored

 

[Ffdlt371]

Lane change turn signal count is easy to change with forscan.

Go into forscan and once loaded up, go to the SCCM non as built. Find "Lane change cancel blink number" and change it to what you want. Then apply the change. Cycle your truck off/on and that's it.

 

[buuuhler]

Lane change turn signal count is easy to change with forscan.

Go into forscan and once loaded up, go to the SCCM non as built. Find "Lane change cancel blink number" and change it to what you want. Then apply the change. Cycle your truck off/on and that's it.

This is the way

 

[Los150]

Changed it. Thanks!

 

[Wolverine7]

What changes did you have to make with Forscan to get it working?

You'll need to contact rugedraw for that part once you get all the modules updated.

 

[Jimmy Young]

Lane change turn signal count is easy to change with forscan.

Go into forscan and once loaded up, go to the SCCM non as built. Find "Lane change cancel blink number" and change it to what you want. Then apply the change. Cycle your truck off/on and that's it.

Changed mine this weekend. Probably the easiest FORScan so far.

 

[nojo14]

+1 on everything. Both mine and my friends 22 Platinum have BC 1.4 as well using the same process.

Everything works great!

We’re they both powerboost engines?

 

[coops361]

One was a 3.5 one was the powerboost.

 

[nojo14]

Nice. Same code changes for both? I can’t get mine to work for my 2021 eco boost. Keep getting a front collision warning fault and lane keep assist fault.

 

[Ffdlt371]

Nice. Same code changes for both? I can’t get mine to work for my 2021 eco boost. Keep getting a front collision warning fault and lane keep assist fault.

Does your truck still offer you blue cruise availability? Did you update your modules?

 

[nojo14]

It won’t even allow me to use cruise control when all those faults are on. All modules are updated prior to making changes in forscan. The only way I can clear them is to reprogram the ipma a module in FDRS.

 

[blankkey]

Thanks to rugedraw I have Bluecruise 1.4 features working on my '21. I am missing the Sync display controls for lane change though and need to revisit that part even though it's working.

 

[Ffdlt371]

Once all changes are made, make sure you are fastening your sestbelt while driving and trying to use bluecruise. Bluecruise won't operate without your buckle connected.

 

[Jimmy Young]

Thanks to rugedraw I have Bluecruise 1.4 features working on my '21. I am missing the Sync display controls for lane change though and need to revisit that part even though it's working.

Thanks to rugedraw I have Bluecruise 1.4 features working on my '21. I am missing the Sync display controls for lane change though and need to revisit that part even though it's working.

I also got 1.4 on my 2021 a few weeks ago with the help rugedraw. I didn't even know there was Sync display as I don't have that either when doing a lane change. Please post the FORScan change for that if you happen to find out. Thank you

 

[Ffdlt371]

I also got 1.4 on my 2021 a few weeks ago with the help rugedraw. I didn't even know there was Sync display as I don't have that either when doing a lane change. Please post the FORScan change for that if you happen to find out. Thank you

When he refers to sync display, he is referring to the menu options to turn lane change and other proms on or off. Check your PM

Sponsored