Sponsored
OP
OP
AdamC

AdamC

Well-known member
First Name
Adam
Joined
Sep 11, 2021
Threads
7
Messages
80
Reaction score
148
Location
Orlando
Vehicles
2021 RCSB 5.0 Whippled
Would you mind sharing your source and part numbers (if you have them)? Also, have you found a rear kit yet?
I got them from LittleShopMFG. I am having some abs issues. I’m trying to pin down the problem. Probably going to swap back to stocks in the front and see if the problem persists. Wilwood knows of my problem and doesn’t believe their brakes are the issue. Unfortunately I don’t know enough about ABS to self-diagnose.
 

Jmet8

Well-known member
Joined
Mar 10, 2022
Threads
4
Messages
132
Reaction score
179
Location
South
Vehicles
Bronco
Hey truck looks great. Do you have any rubbing from the wheel/tires Forgestar X14s ?
 

Sponsored

OP
OP
AdamC

AdamC

Well-known member
First Name
Adam
Joined
Sep 11, 2021
Threads
7
Messages
80
Reaction score
148
Location
Orlando
Vehicles
2021 RCSB 5.0 Whippled
Wilwoods have been removed and back to stock brakes. Too many issues. If you’re thinking about putting big brakes on your 14th gen truck, think again.
There is a electronic brake assist on these trucks, likely for self-driving future, and it doesn’t like variables changing.
 

Rockman5159

Well-known member
First Name
Rocky
Joined
Nov 19, 2021
Threads
12
Messages
671
Reaction score
394
Location
Marion SC
Vehicles
2021 ford f150 FX4
Occupation
retired
  • 2021 XLT 5.0 2wd
  • Whipple Supercharger stage 2
  • 3.31 modified mustang LSD
  • DrivelineOne aluminum driveshaft
  • 22x10 +30 Forgestar x14 Bronze
  • Wilwood TX6 front 6 pistons & drilled/slotted rotors (removed)
  • 305/40 Yokohama Parada Spec X
  • Weld s77 20x10 w/ Nitto555R2 305/50
  • VAS rear flip kit w/ Fox 2.0 shocks
  • VAS traction bars
  • Belltech coilovers
  • IHC helper bags
  • VAS traction bars
  • Airride 25980EZ on-board compressor
  • RetraxPro XR tonneau
  • JLT catch can
  • OEM projector LED Fog & Tailights
  • OEM center console & leather seats
  • 12” OEM sync 4 display
  • Full color match completed
  • Custom side exit exhaust Corsa dual 4” tips
  • Illusion Audio Carbon series powered by a Mosconi Pro 5 channel & Pro 2 with Helix DSP. MTI built subwoofer enclosure & sail panels. Active 3-way, 8 speakers total.

7B0659C9-31FB-4DAE-ABE0-242214D544D7.jpeg
41B9447E-C375-4413-9B5C-96E94B680470.jpeg


ED01766B-808D-43AA-90C6-6A92801F5299.jpeg
10C0D141-1352-40AA-BA20-FA81019A62E6.jpeg

305DA30D-ADC5-4C63-A356-A0E816C151ED.jpeg
View attachment 46718
A5FEF568-0658-4347-920A-CEE3739B0998.jpeg

44952E7A-4618-4DDF-A919-29EA6FB4C16E.jpeg
NICE VERY NICE have you tried it in the 1/4 run yet? Should be super fast
 

Sponsored


parkerdog

Well-known member
Joined
Oct 5, 2021
Threads
27
Messages
699
Reaction score
388
Location
West Central Illinois
Vehicles
22 f150 UNICORN (rcsb XLT co-pilot 360 assist 2.0)
Occupation
Keeper of the DOG and running with scissors.
Would you have a write up on how you did the center console that I have missed?

The whole truck looks great by the way!
 
OP
OP
AdamC

AdamC

Well-known member
First Name
Adam
Joined
Sep 11, 2021
Threads
7
Messages
80
Reaction score
148
Location
Orlando
Vehicles
2021 RCSB 5.0 Whippled
Would you have a write up on how you did the center console that I have missed?

The whole truck looks great by the way!
The center console bolts right in. There’s not much to write up about. The hardest part is acquiring the parts and the cost associated in getting clean used parts because brand new parts from ford are $3k+
 

parkerdog

Well-known member
Joined
Oct 5, 2021
Threads
27
Messages
699
Reaction score
388
Location
West Central Illinois
Vehicles
22 f150 UNICORN (rcsb XLT co-pilot 360 assist 2.0)
Occupation
Keeper of the DOG and running with scissors.
After I wrote that I perused flea bay and I see people are pretty proud of their offerings. Looks like $1500 was the going rate for a used one.
 
OP
OP
AdamC

AdamC

Well-known member
First Name
Adam
Joined
Sep 11, 2021
Threads
7
Messages
80
Reaction score
148
Location
Orlando
Vehicles
2021 RCSB 5.0 Whippled
After I wrote that I perused flea bay and I see people are pretty proud of their offerings. Looks like $1500 was the going rate for a used one.
In my experience most all $1500 offerings have damage and they’ve been listed for a long time or several times. It’s a hard pill to swallow, probably more than any other part of the truck for me.
 

parkerdog

Well-known member
Joined
Oct 5, 2021
Threads
27
Messages
699
Reaction score
388
Location
West Central Illinois
Vehicles
22 f150 UNICORN (rcsb XLT co-pilot 360 assist 2.0)
Occupation
Keeper of the DOG and running with scissors.
Me too! There was the company in wisconsin that made a police console for them but if I was going to do that I'd try making my own and it would look the same probably. Nothing beats a factory look.
Sponsored

 
 




Top