Space White Build

[SpaceWhiteF150]

Thanks fella. I like your build so far. Is your front license plate holder mounted offset or center. Ive seen pics of both?

Currently offset with the Swarfworks tow hook bracket! But yes you have seen both!

Sponsored

 

[joelle king]

amazing I'm loving this color more and more recently

Kodi nox​

 

[SpaceWhiteF150]

It’s been awhile, I have a few mods coming! Just changed the oil! Switched it up went with Pennzoil Ultra Plat and a fomoco filter. If you don’t have a drain valve on your truck you aren’t living! Put one on next oil change.

 

[SpaceWhiteF150]

Got an addition to the drain valve!

Oil filler funnel that fully locks in. Really is an amazing product.

If interested contact

 

[SpaceWhiteF150]

Lots of mods in progress, will post when the truck is cleaned up!
-Garmin dash cam
-tint
-paint match tailgate pull, mirrors, side badges
-icon upper control arms
-catch can

 

[JohnMcClane]

So I have a multitude of funnels, I've purchased two "hoses" that are "supposed" to attached to the oil bottle, but neither have been large enough or threaded properly, this locking funnel looks promising. Thanks for sharing, looking forward to the new mods, which icon UCA did you go with?

 

[SpaceWhiteF150]

So I have a multitude of funnels, I've purchased two "hoses" that are "supposed" to attached to the oil bottle, but neither have been large enough or threaded properly, this locking funnel looks promising. Thanks for sharing, looking forward to the new mods, which icon UCA did you go with?

Icon delta joint tubular arm, Thanks

 

[bushpilot]

Lots of mods in progress, will post when the truck is cleaned up!
-Garmin dash cam
-tint
-paint match tailgate pull, mirrors, side badges
-icon upper control arms
-catch can

I installed the J&L can - and added the (unnecessary) extension. In a 1000 miles ive barely got a coating on the inside of the can.

Im using the FloTools BIG funnel….it stands up nice and securing in the filler neck…and you can turn the 6 quart oil jug upside down in it and walk away while it drains….

 

[SpaceWhiteF150]

I installed the J&L can - and added the (unnecessary) extension. In a 1000 miles ive barely got a coating on the inside of the can.

Im using the FloTools BIG funnel….it stands up nice and securing in the filler neck…and you can turn the 6 quart oil jug upside down in it and walk away while it drains….

Good to know thanks, I was going to wait for warranty to expire then put mine on. I think it depends the type of driving and the climate the truck is used in. I will most likely be in the same boat as you with barely any in the cup!

 

[bushpilot]

Good to know thanks, I was going to wait for warranty to expire then put mine on. I think it depends the type of driving and the climate the truck is used in. I will most likely be in the same boat as you with barely any in the cup!

the can is VERY easily removed - one bolt (holding the can to the firewall) and 2 removable/reusable quick disconnects for the hoses....I've saved my hose.....and will remove the can, should I need to go in for any warranty service.

Im on the fence but may remove the can extension - it makes removal of the can a bit of a challenge...and I really dont think I need the extension.

 

[PilotGore]

Got an addition to the drain valve!

Oil filler funnel that fully locks in. Really is an amazing product.

If interested contact

Thanks for the shout out!

I make 3D printed twist to lock oil funnels for almost every single ford going back to the early 90’s. These funnels take oil as fast you can pour it, and since they’re o-ring sealed, they’ll never leak. After you use the funnel, attach the included caps on both ends so dust doesn’t get into the funnel while it sits on the shelf. The model that @SpaceWhiteF150 is using is the standard size, and it costs $60 including shipping. The XL model is 50% larger and is capable of holding a 5 quart jug. That model sells for $75 including shipping.

I currently have a 2 week printing backlog, but if you’re interested don’t hesitate to PM me or shoot me an email.

-Jon

 

[SpaceWhiteF150]

Sneak peak! Wet sanding and polishing takes to long!!

 

[SpaceWhiteF150]

Happy 4th !

 

[SpaceWhiteF150]

Dash Cam!

I wanted the smallest camera while retaining pretty good clarity. This camera does not track speed or have a rear facing cam. It does record audio. When it recognizes a crash or the back button is pushed it saves a 10 sec clip, 5 sec before and after the “accident”. The rest of the time it records and deletes the files on the sd card.

The camera is a garmin mini 2 dash cam.
https://www.garmin.com/en-US/p/731428/pn/010-02504-00

The camera is wired with
https://www.amazon.com/REARMASTER-U...MI4P7fwtf2_wIVK3tMCh0pOA35EAQYAiABEgLVM_D_BwE
This keeps you from having to tap a fuse and streamlines the install. There’s a pic showing how the wire was run, you do have to remove the pillar with the handle.

Here’s the final results!

 

[SpaceWhiteF150]

If you wash your truck, without fail it’s raining the next day!

Sponsored