Request VIN Lookup Thread

[cool rod]

Last OTA was 4.2.4 back in October. You're missing the 6.x.x updates as well as some bug fix updates. In your case, I think it is just a matter or patience. just looks like no love from the OTA gods. I don't see reason to be concerned as far as there being an issue with your truck.



The OTA failed to install on 2/19 due to the folllowing error:

"errorCode":"DiffSpaceCheckFailed(83)""errorCategory":"ERROR_CATEGORY_ALM(3)""ecuId":"2000""fpn":"PU5T-14H009-FAB"

I do not know exactly what that means, but it is nothing you did wrong and it did not fail due to your battery. Nothing you can do now but wait for it to be resent and hope for better luck next time.



Same situation as the first person I responded to on this post. Last OTA was 4.2.4 followed by a PU APIM update after that. so you're needed the 6.x.x updates and some bug fix updates. Your truck is fine. Many people stopped getting updates where you guys are at, but the issue is Ford's crappy OTA process and not your truck.

Thank you Rugedraw. All those software updates need to be done, is that it? Or is it showing that they have been done? I had it at the dealer yesterday and they didn't mention anything. No problem taking it back if that's what you suggest I should do.

Sponsored

 

[rugedraw]

Thank you Rugedraw. All those software updates need to be done, is that it? Or is it showing that they have been done? I had it at the dealer yesterday and they didn't mention anything. No problem taking it back if that's what you suggest I should do.

The dealer will not do the updates as Ford does not pay them for the labor hours associated with module updates. They will only do updates that they can tie to a recall or or CSP as that is the only way they can get paid for their work.

 

[cool rod]

The dealer will not do the updates as Ford does not pay them for the labor hours associated with module updates. They will only do updates that they can tie to a recall or or CSP as that is the only way they can get paid for their work.

Thanks again. That's very interesting and something I hadn't heard before. Rugedraw you're one of the reasons this forum is so good.

 

[Dvcpro13]

I got my truck in to have them perform the update you guys were great at telling me I needed done. I was hoping if someone could search my VIN to make sure the dealer actually did the update and aren’t just telling me they did haha I also am wondering if my truck is showing any issues because today I started having a new issue where if I come to a complete stop at a red light then when I take my foot off the brake it doesn’t gradually move as I would expect it to, but once I touch the gas, even gently, it jerks the whole truck and then moves.
VIN: 1FTFW1ED6MFD03054

you guys are awesome in this group!

Are you talking about Auto Hold?

 

[kysags]

Are you talking about Auto Hold?

It does actually feel like the auto hold! I tried that out a while ago and didn’t like it at all so I turned it off. This is happening all on its own and started out of the blue on my drive home today.

 

[Dvcpro13]

It does actually feel like the auto hold! I tried that out a while ago and didn’t like it at all so I turned it off. This is happening all on its own and started out of the blue on my drive home today.

Check and maybe see if that got enabled. You’ll see the green hand signal bottom left of your cluster when you come to a stop.

 

[Moe7]

Would someone be kind enough to check my VIN for module and/or OTA updates? Other than a minor one last week, I've been dry on OTAs since December and getting the itch to get my truck caught up this weekend:

1FTEW1E89NFC02316

Thanks!

 

[rugedraw]

Would someone be kind enough to check my VIN for module and/or OTA updates? Other than a minor one last week, I've been dry on OTAs since December and getting the itch to get my truck caught up this weekend:

1FTEW1E89NFC02316

Thanks!

Last power up was 6.5.0. Unofficial list of modules pending updates is below:

 

[kysags]

Check and maybe see if that got enabled. You’ll see the green hand signal bottom left of your cluster when you come to a stop.

Checked it this morning when I drove to work, it wasn’t turned on but didn’t seem to be doing it today yet. I’m hoping it was just a random glitch or one off thing because the weather here has gone from 15°C down to -6°C within a 24 hour period. I appreciate you taking the time to discuss with me.

 

[Old_Man_Mertle]

VIN 1FTFW1E83MFA27404

I have never gotten an update, and just recently purchased the Mongoose VCI Interface and was planning on following the directions here https://www.f150gen14.com/forum/threads/ecu-module-programming-guide-using-fdrs.8249/

Am I good to go through that procedure or is there something else I need to do? Thanks so much for the help on this forum, I'm hugely frustrated by this and this forum has been a huge help

 

[Dvcpro13]

VIN 1FTFW1E83MFA27404

I have never gotten an update, and just recently purchased the Mongoose VCI Interface and was planning on following the directions here https://www.f150gen14.com/forum/threads/ecu-module-programming-guide-using-fdrs.8249/

Am I good to go through that procedure or is there something else I need to do? Thanks so much for the help on this forum, I'm hugely frustrated by this and this forum has been a huge help

I’m updating my truck as I type this. That tutorial is pretty bang on. I had a little trouble logging in to FDRS but @Jesse-Infotainment was able to steer me in the right direction (choose the second option in the drop down box and enter the email address and password you used to access Motorcraft). Everyone on here is very helpful if you get stuck. The best advice I’ve seen is to carefully read each h step as you go and make sure to follow the prompts in FDRS.

 

[dhageremtp]

Can I get someone to check updates for me: 1ftfw1e82nke47518

I appreciate the help all!

 

[rugedraw]

VIN 1FTFW1E83MFA27404

I have never gotten an update, and just recently purchased the Mongoose VCI Interface and was planning on following the directions here https://www.f150gen14.com/forum/threads/ecu-module-programming-guide-using-fdrs.8249/

Am I good to go through that procedure or is there something else I need to do? Thanks so much for the help on this forum, I'm hugely frustrated by this and this forum has been a huge help

Your truck is on Sync 20262 which is the broken software from 2020. I'm afraid that updating your truck is not s straight forward process as what you see in that post. The first step to recover your APIM will be to follow the attached procedure which is not easy for someone with no experience to do.

 

[rugedraw]

Can I get someone to check updates for me: 1ftfw1e82nke47518

I appreciate the help all!

Last OTA you had sent to you was 6.8.0 back in December, but the update was canceled by the server before it had a chance to install. You are not too behind as far as power-up updates go.

 

[dhageremtp]

Last OTA you had sent to you was 6.8.0 back in December, but the update was canceled by the server before it had a chance to install. You are not too behind as far as power-up updates go.

Thanks, just got a new battery on a warranty claim, was also reading on folks who had updates that didnt go through due to the adding of a heated steering wheel, which I too added, so wondered where I was at in the process. I appreciate the help!

Sponsored