My RCSB race truck project build

[White95]

Switched to some Lasfit, switchback fog light bulbs.

Sponsored

 

[White95]

 

[LionHart]

What does the fuel pump button do in trucks so optioned? I need to find a switch panel without it.

This is the fuel door release specific to Powerboost/hybrid trucks.

 

[White95]

Made a few meaningful interior upgrades:

Now to research forscan updating for the 12” screen. Any suggestions?

 

[White95]

New personal best time:

 

[Goldeneye36]

Awesome build. I love the sleeper look and yours is tastefully done. Keeping it NA and doing most of the work yourself is impressive as well!

 

[White95]

Awesome build. I love the sleeper look and yours is tastefully done. Keeping it NA and doing most of the work yourself is impressive as well!

Thank you for the kudos! It has been satisfying journey to date and excited to continue develop popping this truck.

 

[JCsTruck]

That is so impressive! I almost pulled the trigger on a 2wd RCSB 5.0 over the holiday but was turned off by Ford reducing the rear seat space by 4-inches compared to my 2014 RCLB. I ended up getting a supercab 5.0 but it doesn't have the 3.73 axle however, I got it for a great price. Here is a picture of the actual RCSB in Antimater blue with 103A I came close to buying next to my 2014 RCLB with 3.7.

 

[White95]

Just a little bit quicker. For this pass, I removed the passenger seat, jack & spare, exhaust from the resonator back and then installed the side exit pipe. For the next pass, I’m contemplate removing the sway bar, center console and rear bumper.

 

[v8440]

You still have the front swaybar installed, or am I misunderstanding? If it is installed and it has the same effect I've experienced with cars, removing it will allow a lot more weight transfer on launch, as it won't inhibit the front rising.

 

[White95]

You still have the front swaybar installed, or am I misunderstanding? If it is installed and it has the same effect I've experienced with cars, removing it will allow a lot more weight transfer on launch, as it won't inhibit the front rising.

Yes, it is still installed and you’re spot on about weight transfer. This can be dialed further since I have adjustable dampers.

 

[v8440]

Will the dampers do 90/10? If so, that's where I'd start. It's funny we're talking about this, as I just yesterday got my '24 rcsb 4x4 home. I'm not planning on lowering it, and I want to leave the poverty stars (steel wheels) on it. Question, is there any practical, cheap way to move the rear shocks inboard without simply cutting the mounts and rewelding them? I'm not afraid to do that if I have to, but I'd prefer not to. There's not a lot of room for wide rear tires/wheels as they come from the factory.

 

[White95]

Will the dampers do 90/10? If so, that's where I'd start. It's funny we're talking about this, as I just yesterday got my '24 rcsb 4x4 home. I'm not planning on lowering it, and I want to leave the poverty stars (steel wheels) on it.

Yes.

They’re currently set to 12c and 4r. I believe the max setting is 20. It does transfer weight but we’ll see what happens.

 

[White95]

Will the dampers do 90/10? If so, that's where I'd start. It's funny we're talking about this, as I just yesterday got my '24 rcsb 4x4 home. I'm not planning on lowering it, and I want to leave the poverty stars (steel wheels) on it. Question, is there any practical, cheap way to move the rear shocks inboard without simply cutting the mounts and rewelding them? I'm not afraid to do that if I have to, but I'd prefer not to. There's not a lot of room for wide rear tires/wheels as they come from the factory.

Well, there is a bolt-in option:

https://dv8dz9.com/products/ihc-sus...MI3s6A19CEiwMVryvUAR0SGyPPEAQYASABEgL5_vD_BwE

 

[v8440]

Oy, I dunno about that. Won't work with stock unmodified exhaust or spare tire. In the long run it would probably be a good idea, as if I get even halfway serious with it I'd need better shocks anyway.

Sponsored