My 2021 F0150 Tremor Leveled

[Puckett88]

Hey guys, new to his forum but have learned a lot from most of you. I am a proud new owner of a tremor 402a package. So far I have installed a procomp 2.5” level, bakflip mx4 bed cover and linex spray in liner. My husky wheel well liners just showed up so I plan to install those this weekend. Overall I am super happy and pleased with the way this truck rides. I’ve only driven it about 20 miles since I had my level put on yesterday so take this with a grain of salt when I say it drives exactly the same as it did when it was stock as another forum member had mentioned. Hit me up with any questions and let me know your thoughts on the tire size. I may sell these and go up to a 34” big ko2.

Sponsored

 

[BA73]

Hey guys, new to his forum but have learned a lot from most of you. I am a proud new owner of a tremor 402a package. So far I have installed a procomp 2.5” level, bakflip mx4 bed cover and linex spray in liner. My husky wheel well liners just showed up so I plan to install those this weekend. Overall I am super happy and pleased with the way this truck rides. I’ve only driven it about 20 miles since I had my level put on yesterday so take this with a grain of salt when I say it drives exactly the same as it did when it was stock as another forum member had mentioned. Hit me up with any questions and let me know your thoughts on the tire size. I may sell these and go up to a 34” big ko2.

Big thumbs up buddy. What did the shop have to say about the install (hours, ease, alignment, etc)?

 

[Puckett88]

Big thumbs up buddy. What did the shop have to say about the install (hours, ease, alignment, etc)?

Funny you ask. I was charged $660 for parts and 2.5 hrs labor by my mechanic who runs his own shop. When he dropped it off to me last night he said that I got a hell of a deal because in reality it should have been a 5r labor charge. Something about the 2021’s and how you access the front struts, alignment, etc. was different than previous years. It was late when he dropped off so I didn’t really drill him with questions but if you have any questions, lemme know and I’ll ask him.

 

[Sethysan]

Looks awesome!

My plan is to run 35s as I do on my current f150, but I think BFG KO2 34s would fit your truck perfect with the level.

 

[OnceAnEagle]

Hey guys, new to his forum but have learned a lot from most of you. I am a proud new owner of a tremor 402a package. So far I have installed a procomp 2.5” level, bakflip mx4 bed cover and linex spray in liner. My husky wheel well liners just showed up so I plan to install those this weekend. Overall I am super happy and pleased with the way this truck rides. I’ve only driven it about 20 miles since I had my level put on yesterday so take this with a grain of salt when I say it drives exactly the same as it did when it was stock as another forum member had mentioned. Hit me up with any questions and let me know your thoughts on the tire size. I may sell these and go up to a 34” big ko2.

Looks great! Can you let us know if you experience increased hood vibration? Read elsewhere that leveling causes the hood to vibrate more at highway speeds.

 

[TxTremor]

Looks great! Can you let us know if you experience increased hood vibration? Read elsewhere that leveling causes the hood to vibrate more at highway speeds.

I haven't on my leveled Tremor. May be due to the vented hood keeping the pressure out though.

 

[Puckett88]

No vibrations on mine either. All good!

 

[IconicTremor]

I haven't on my leveled Tremor. May be due to the vented hood keeping the pressure out though.

Hood vents are fake.

 

[Nomad]

?? Yep, unlike the Raptor they are just for looks.…

 

[GaBoy69]

Sharp looking truck! Trouble is that is that although the front is higher, it's still not "level". Ran into the same problem with my 2020 F150. Going to do some research before I "level" my 2021 F150. Leaning towards a 3" lift kit without using the rear parts, These trucks have crazy rake angles. LOL

 

[Captain]

I’m not really familiar with the Tremor suspension. How much higher are they from the factory? I know the tires are a little over 1” taller than the FX4 18s but I don’t know what you guys get for suspension lift.

 

[HellcatTremorStang]

Hey Gents,


have any of you had a chance to measure your leveled truck?
I’d like to go with a 2” Level and some 34” tires with 18” rims+1 offset . I just didn’t know how much taller it’ll make the truck


Any input?

 

[SuperRaptor]

Truck looks great, if I didn't have to do the orange I most likely would have done a tremor. Is everyone just going to gloss over being parked in front of a (big) private jet??

 

[rmccallum44]

Hey guys, new to his forum but have learned a lot from most of you. I am a proud new owner of a tremor 402a package. So far I have installed a procomp 2.5” level, bakflip mx4 bed cover and linex spray in liner. My husky wheel well liners just showed up so I plan to install those this weekend. Overall I am super happy and pleased with the way this truck rides. I’ve only driven it about 20 miles since I had my level put on yesterday so take this with a grain of salt when I say it drives exactly the same as it did when it was stock as another forum member had mentioned. Hit me up with any questions and let me know your thoughts on the tire size. I may sell these and go up to a 34” big ko2.

With the level did you have to get your headlight realigned? Or didn’t notice a difference?

 

[Apollo20]

Man I just can’t decide if I should go 2.5 or 2 inches! The kit I ordered is adjustable, i was gonna roll with 2.5, but I’m worried the cv joints and towing.

Have you towed yet? Has your ride quality worsened ?

Sponsored