My 2021 F-150 on 2.25" Readylift Leveling Kit, 20x9 Fuel Rebel 6 Wheels + BFG KO2 Tires

[Platinum Peasant]

Thank you. No rear blocks. Front only.

Could you post a photo of how much the tires “stick” out past the fender? Like a shot from the front and back?

also, gonna recalibrate the speedometer?

Sponsored

 

[BDUBSpeed]

Be careful if it's not the 21 kit they just released. I had a conversation with ready lift about the 20 kit not properly working on the 21.

thanks. I’ll follow up on that.

Great question. Technically, their website only shows a 2.0" level for the 2021. I had asked for a 2" level, but he told me he had 2.25" kits in stock so we went with it. So it might be a 2020 kit. I don't think they are much different

I am going to follow up with the dealer on the kit. The Readylift website only offers a 2.0" level and there appears to be a difference in the hardware between the 15-20 kit and the '21 kit. I'll post back with I learn.

 

[BDUBSpeed]

Be careful if it's not the 21 kit they just released. I had a conversation with ready lift about the 20 kit not properly working on the 21.

Thanks. I see that now on their website. I'll be following up with the dealer.

 

[JANate]

2.25" Readylift Level, 20x9 Fuel Rebel 6 with +1 offset, 295/60/20 BFG KO2 tires. Had to remove the front crash bar and trim the lower valence plastic just a little, but a 34" tire fits.

Question (apologies if this has been answered in earlier threads)....Will wheels from 2015-2020 F150's fit on 2021? (Same thread pattern and offset?)

 

[BDUBSpeed]

Question (apologies if this has been answered in earlier threads)....Will wheels from 2015-2020 F150's fit on 2021? (Same thread pattern and offset?)

I don’t know about the offset on the 20 to 21 or if they changed but the bolt pattern would be the same so they should fit. I wouldn’t see any reason they wouldn’t.

 

[satexas]

I don’t know about the offset on the 20 to 21 or if they changed but the bolt pattern would be the same so they should fit. I wouldn’t see any reason they wouldn’t.

It‘s exactly the same bolt pattern and same -44 offset

 

[satexas]

Question (apologies if this has been answered in earlier threads)....Will wheels from 2015-2020 F150's fit on 2021? (Same thread pattern and offset?)

exact same

 

[MikeOnTheMove]

Me too! I ordered the Stone Grey and was having doubts. But it's looking killer! So happy I did! Thanks for the post.

 

[bobstar]

2.25" Readylift Level, 20x9 Fuel Rebel 6 with +1 offset, 295/60/20 BFG KO2 tires. Had to remove the front crash bar and trim the lower valence plastic just a little, but a 34" tire fits.

Looks great!

 

[BDUBSpeed]

Could you post a photo of how much the tires “stick” out past the fender? Like a shot from the front and back?

also, gonna recalibrate the speedometer?

I’ll get a couple shots and post them up. I don’t believe the new PCM’s can be recalibrated. Ford made the changes a couple of years ago. The Speedo shows about 3 mph slower than actual speed so not a big deal for me.

 

[JG601A]

Looks amazing! I’m new to the forum and have been learning a bunch.

If I used a +20 offset instead of the +1 that BDUBSpeed used, would that eliminate the need to remove the crash bar and not have to trim? Thanks.

Should be getting my KR 4x4 in ~2 weeks and figuring out what I can fit with a 2” (or 2.25”) level kit and no trimming or rubbing.

 

[BDUBSpeed]

Check out what 21CaliPlateEB did on his build. I think this will answer your question. His is closer to what you are asking about. Short answer is yes, I think you can.

 

[petervenkman]

bump on that request for the pic of the poke.

also, do you know what % tint they put on the fronts?

 

[BDUBSpeed]

bump on that request for the pic of the poke.

also, do you know what % tint they put on the fronts?

If I recall, it’s 20% and the rear were tinted darker to match the front. They are pretty dark at night from inside the truck but help in the Texas heat

 

[SALVAGE]

Looks amazing! I’m new to the forum and have been learning a bunch.

If I used a +20 offset instead of the +1 that BDUBSpeed used, would that eliminate the need to remove the crash bar and not have to trim? Thanks.

Should be getting my KR 4x4 in ~2 weeks and figuring out what I can fit with a 2” (or 2.25”) level kit and no trimming or rubbing.

I put a 2in leveling kit with 33 12.5 20 on the original wheel and I have no rubbing on my PLATINUM

Sponsored