King Ranch Club; Post Them Photos

[BMWtoF150]

Bought myAgate Black 2021 KR on December 18th
Ceramic window tinting is done and going back for the windshield to be done next week.
Line-X blown in..
13" Antenna installed..
Have ordered mud flaps, window louvers and a
Bug deflector from Ford.
Added a Chrome Texas Longhorn for the hitch receiver.
Added a Smith & Wesson decal on back window..
Received my USCG Veteran license plate frames today.
Have ordered an (ARE) Bed Cover, no idea when they will get it they are fabricating them for the 2021.
Currently looking for Chrome Grille Guard, none out there for the 2021..
Changing exhaust system in the next couple of weeks.
Once the bedcover is installed it's going in for the Ceramic finish to be applied to the paint.
The one interior shot is what I have in my truck but pic is from Ford website..
Have ordered my Texas vanity License Plates, will receive them in 3 weeks..
I think that's it for now..
Love the truck, the running boards aren't a problem for me and I love the B & O Unleashed..

Beautiful truck. I love black, but have trouble keeping it clean.

Sponsored

 

[Bryan Simon]

T

That longhorn looks like it should be stock on a King Ranch!

That thing should be on every truck destined for Texas

 

[SonnyDigs]

Beautiful truck. I love black, but have trouble keeping it clean.

That's a fact,
I can't even guess how many black vehicles I've owned.. Always say I won't do it again.. Especially in this Texas heat and water spotting.. That why I'm going to do the Ceramic coating..
Hoping it will help to make it easier cleaning it up..

 

[SonnyDigs]

T

That thing should be on every truck destined for Texas

I agree.
They get $60 for them but have to say it's a 1/4" thick steel and very well made..
Worth every penny..

 

[snoshuu]

Bought myAgate Black 2021 KR on December 18th
Ceramic window tinting is done and going back for the windshield to be done next week.
Line-X blown in..
13" Antenna installed..
Have ordered mud flaps, window louvers and a
Bug deflector from Ford.
Added a Chrome Texas Longhorn for the hitch receiver.
Added a Smith & Wesson decal on back window..
Received my USCG Veteran license plate frames today.
Have ordered an (ARE) Bed Cover, no idea when they will get it they are fabricating them for the 2021.
Currently looking for Chrome Grille Guard, none out there for the 2021..
Changing exhaust system in the next couple of weeks.
Once the bedcover is installed it's going in for the Ceramic finish to be applied to the paint.
The one interior shot is what I have in my truck but pic is from Ford website..
Have ordered my Texas vanity License Plates, will receive them in 3 weeks..
I think that's it for now..
Love the truck, the running boards aren't a problem for me and I love the B & O Unleashed..

Beautiful truck!

What's your vanity plates gonna say, and what's the extra cost for them?

 

[NumbersGuy]

Excited for my eventual entry into the KR club. I'll be sure to post some pics once my truck is built and delivered!

 

[currybob]

No one has commented on the 1964 plate on the back of mine..

I didn't even notice it, was too focused on that beautiful truck and that cool hitch cover!

Here are some of my inside shots of course will look the same as everyone else's. Lol

Got my bed spray-in done yesterday and Michelin's installed today. going to get my old bed cover on tomorrow and the mudflaps came in too. Remove some dealer advertising stickers too and whatever else I can squeeze in. Cut my antenna down to keep from banging the garage door too. Took about 8 inches off.

Took a shot of my MPGs from my drive back, 60% 4 lane not interstate @65 mph and 40% Cities at stop and go. I believe I'm in love with this thing! We don't have winter gas or even summer additives so engines seem to love that.

 

[Aaron34]

I didn't even notice it, was too focused on that beautiful truck and that cool hitch cover!

Here are some of my inside shots of course will look the same as everyone else's. Lol

Got my bed spray-in done yesterday and Michelin's installed today. going to get my old bed cover on tomorrow and the mudflaps came in too. Remove some dealer advertising stickers too and whatever else I can squeeze in. Cut my antenna down to keep from banging the garage door too. Took about 8 inches off.

Took a shot of my MPGs from my drive back, 60% 4 lane not interstate @65 mph and 40% Cities at stop and go. I believe I'm in love with this thing! We don't have winter gas or even summer additives so engines seem to love that.

Great to see the MPG’s coming in as expected (or better). Fine looking truck, Bob!

 

[SonnyDigs]

Beautiful truck!

What's your vanity plates gonna say, and what's the extra cost for them?

Texas plates
They will say
SON-EE
Back ground says
Don't Tread On Me..
With a coiled rattle snake on the left side..
They will go well with the Smith &Wesson decal..
They are $450 for 5 years.
That's just for the plates. You still have pay your yearly registration fee..
Can change the back ground any time as many times as you like for $50
My first time to buy custom plates.
But this truck needs them..
Lol

 

[SonnyDigs]

I didn't even notice it, was too focused on that beautiful truck and that cool hitch cover!

Here are some of my inside shots of course will look the same as everyone else's. Lol

Got my bed spray-in done yesterday and Michelin's installed today. going to get my old bed cover on tomorrow and the mudflaps came in too. Remove some dealer advertising stickers too and whatever else I can squeeze in. Cut my antenna down to keep from banging the garage door too. Took about 8 inches off.

Took a shot of my MPGs from my drive back, 60% 4 lane not interstate @65 mph and 40% Cities at stop and go. I believe I'm in love with this thing! We don't have winter gas or even summer additives so engines seem to love that.

Thanks Bob and likewise on yours, it's a beauty..
That was the color I had intended on getting but never found the features so when I found the black one I jumped on it after hearing all the stories of wait time after ordering..
I just lucked out..
Quote Reply

 

[SonnyDigs]

Excited for my eventual entry into the KR club. I'll be sure to post some pics once my truck is built and delivered!

Look forward to it..
Soon I hope..

 

[SonnyDigs]

I didn't even notice it, was too focused on that beautiful truck and that cool hitch cover!

Here are some of my inside shots of course will look the same as everyone else's. Lol

Got my bed spray-in done yesterday and Michelin's installed today. going to get my old bed cover on tomorrow and the mudflaps came in too. Remove some dealer advertising stickers too and whatever else I can squeeze in. Cut my antenna down to keep from banging the garage door too. Took about 8 inches off.

Took a shot of my MPGs from my drive back, 60% 4 lane not interstate @65 mph and 40% Cities at stop and go. I believe I'm in love with this thing! We don't have winter gas or even summer additives so engines seem to love that.

That's the storage box I thought I had for 4 days and then went and looked..
Nope didn't have one and having trouble finding after market one that I like..

 

[currybob]

That's the storage box I thought I had for 4 days and then went and looked..
Nope didn't have one and having trouble finding after market one that I like..

That is too bad, it is a real cool unit.

 

[SonnyDigs]

That is too bad, it is a real cool unit.

And to be able to lock access to it..
Great..

 

[snoshuu]

Texas plates
They will say
SON-EE
Back ground says
Don't Tread On Me..
With a coiled rattle snake on the left side..
They will go well with the Smith &Wesson decal..
They are $450 for 5 years.
That's just for the plates. You still have pay your yearly registration fee..
Can change the back ground any time as many times as you like for $50
My first time to buy custom plates.
But this truck needs them..
Lol

Thanks for sharing.

(Texas native refugee here currently existing in North Dakota)

I find it interesting how each state has different costs for vanity plates.

Only $20/yr in ND

Sponsored