halo42
New member
Looks great, thanks for the reply.It was a custom fabricated bar. The lights do block the sensors and camera a bit but I have learned to live with it.
Sponsored
Looks great, thanks for the reply.It was a custom fabricated bar. The lights do block the sensors and camera a bit but I have learned to live with it.
Looks amazing. What is the leveling kit's height?A little late, but…… I have the pro comp leveling kit on my 2021 XLT and went with the Falken Widepeaks A/T3’s (285/75/17) on 315 Method wheels.
Tires don’t rub at all in drive, but they slightly rub when I turn hard/fast in reverses. Needless to say, I reverse slowly. Hope this helps!
Thank you! I am running a 2.5” Pro Comp Leveling kit, and my tires rub slightly when cranked hard in reverse. My 17” 315 Methods are a 0 offset. My truck is also 2wd.Looks amazing. What is the leveling kit's height?
On my 2022 XLT (coincidentally also silver with BAP) I am trying to fit 315/70/17s +1 offset with a Bilsteins 6112 leveling kit set at max 2.5" height.
I do not want ANY sort of rubbing. Do you think it wont be possible to fit those size tires?
Should i just adjust my expectations and go with a safe 285/75/17 instead?
This looks just right !
Figured I’d ad mine in here. First post on this site! 2.5 AS level with BFGs 35/12.50/r18
It looks like there is no rubbing at all fit.
Figured I’d ad mine in here. First post on this site! 2.5 AS level with BFGs 35/12.50/r18
correct on all accounts! LolIt looks like there is no rubbing at all fit.
Is that right?
Basically, this sits +3.5" higher than a regular (non-Tremor 4wd) truck?
And 35's fit with no issues?