Glove Box Lamp Ford Part No. ML3Z-14A411-C

[DEEPDOWN]

So again, after waiting one year (Nov 1, 2021 -Nov 1, 2022), for my Tremor 402A to arrive, and replace my 2021 Lariat FX4, I see (and think I had read), that 2022s had Glove Box Lamp deleted. I know it may be insignificant to some, but for a $25 part, it seems ridiculous, that FoMoCo would omit this. Question does anyone know if the main wiring harness, still has a tap, for this relatively cheap part to be retrofitted?

Sponsored

 

[dhrandy]

I’d honestly rather have the LED tag lights than the glove box leds. I rather use the glove box. Did the Tremor keep the LED tag lights?

 

[Grafx36510]

I’d honestly rather have the LED tag lights than the glove box leds. I rather use the glove box. Did the Tremor keep the LED tag lights?

Nope. No led license plate lights.

 

[dhrandy]

Nope. No led license plate lights.

Of course LED bulbs are cheap enough, just don’t go with the cheapy ones. Don’t ask me how I know with previous vehicles. Lol.

 

[Grafx36510]

Of course LED bulbs are cheap enough, just don’t go with the cheapy ones. Don’t ask me how I know with previous vehicles. Lol.

Lol. I know. I was actually looking at the actual ford module they use. Like $25-$30 a piece. Probably just going to get the bulbs.

 

[Grafx36510]

So again, after waiting one year (Nov 1, 2021 -Nov 1, 2022), for my Tremor 402A to arrive, and replace my 2021 Lariat FX4, I see (and think I had read), that 2022s had Glove Box Lamp deleted. I know it may be insignificant to some, but for a $25 part, it seems ridiculous, that FoMoCo would omit this. Question does anyone know if the main wiring harness, still has a tap, for this relatively cheap part to be retrofitted?

The ‘22s also deleted the lit cup holders and media bin light. I ordered a harness, the cup holder and lights to install.

 

[DEEPDOWN]

The ‘22s also deleted the lit cup holders and media bin light. I ordered a harness, the cup holder and lights to install.

"I ordered a harness, the cup holder and lights to install".
Oh, I never noticed the cup holders (Can't check right now, as it's out for Ceramic coat and front window tint). Do you have a part number(S) for that, and if it's a straightforward retrofit? Any help appreciated!

 

[Grafx36510]

"I ordered a harness, the cup holder and lights to install".
Oh, I never noticed the cup holders (Can't check right now, as it's out for Ceramic coat and front window tint). Do you have a part number(S) for that, and if it's a straightforward retrofit? Any help appreciated!

Reach out to @JHForman812 with regards to the harness, he can help with that. There’s actually an entire thread about re-adding the lights that were deleted for the 2022s. The part numbers for the lights required are:

ML3Z-1513562-CB Cup holder
ML3Z-14A318-C Media Bin light
ML3Z-14A411-C Glove box light

My order from Fairway Ford in Ohio just shipped today (the glove box light was on back order) and the total was $105.65 with shipping.

Edit: here’s the link to the thread: https://www.f150gen14.com/forum/threads/cup-holder-light-installation-media-bin-light-glove-box-light.8385/

 

[JHForman812]

Side note guys, if youre dealing with fairway or your local dealer, use your ford pass points to purchase the lights. makes the mod much cheaper. as for the harnesses I know a guy lol thanks for the mention @Grafx36510

 

[Grafx36510]

Side note guys, if youre dealing with fairway or your local dealer, use your ford pass points to purchase the lights. makes the mod much cheaper. as for the harnesses I know a guy lol thanks for the mention @Grafx36510

I wasn’t able to use my points because I ordered before my truck arrived, but solid advice.

 

[Grafx36510]

I wasn’t able to use my points because I ordered before my truck arrived, but solid advice.

I may be reaching out for some assistance since the parts shipped. I think I’m going to use the console shift method.

 

[JHForman812]

I may be reaching out for some assistance since the parts shipped. I think I’m going to use the console shift method.

was that directed to me?

 

[Grafx36510]

was that directed to me?

Yep. Although I’ll probably re-read the thread around that method of install.

Sponsored