Factory Wheels with Aftermarket Tire Thread

[BigDezil]

Here ya go. And I have the Roush 2.0 coilover level on.

How do you like the Roush 2.0 setup with the tire combo? I’m literally doing this same combo but I’m wondering if the tire makes more of the difference. Trying to turn this boat back into a truck.

Sponsored

 

[cowboytk]

Thanks! I’m still can’t decide between 285/65 or 290/60. I plan to get the air design fender flares so I’m ok with a little poke. Good to know they sit flush with the factory wheels.

they flush with the fender, the wheel was turned a tiny bit thats why theyre sticking out slightly.

 

[KartRacer25]

Cancelled BFG KO2 LT285/60R20/E 125/122S RBL order, and ordered Nitto Ridge grapplers in LT285/60R20 E 125/122Q from local Discount Tire. Should be her Wed 22nd.
Paid for BFGs, but been on back order for weeks now, and still at least 4 weeks out. Screw that, ran out of patience. Now I'm a Ridge Grapplers fan. LOL

 

[Pibblemobile]

Cancelled BFG KO2 LT285/60R20/E 125/122S RBL order, and ordered Nitto Ridge grapplers in LT285/60R20 E 125/122Q from local Discount Tire. Should be her Wed 22nd.
Paid for BFGs, but been on back order for weeks now, and still at least 4 weeks out. Screw that, ran out of patience. Now I'm a Ridge Grapplers fan. LOL

Stock or leveled? I’m pondering this size or the 275/65/20 but I don’t plan on leveling. There’s quite a few pictures of stock trucks with the 275 but not the 285.

 

[KartRacer25]

Pibblemobile
Its stock, still waiting on Fox production of newly designed 2.0 kit.
I'll let you know how it goes tomorrow/Thurs., if the 285/60R20 RGs actually arrive and have matching date codes.
I just loaded my Dremel and cutting wheels ETC in truck, just in case I need to trim air dam. Should fit though. I think 285/65R20 has mixed results without level. (and they wont install those without a level)

 

[flynavy]

Pibblemobile
Its stock, still waiting on Fox production of newly designed 2.0 kit.
I'll let you know how it goes tomorrow/Thurs., if the 285/60R20 RGs actually arrive and have matching date codes.
I just loaded my Dremel and cutting wheels ETC in truck, just in case I need to trim air dam. Should fit though. I think 285/65R20 has mixed results without level. (and they wont install those without a level)

I fit 295/70/18 ridge grapplers on stock truck for what it’s worth with zero issues.

 

[KartRacer25]

Yep, Thanks, all pretty close specs. After following what you did and all the specs, I wanted a little wiggle room for suspension, crash bar, and rear clearance at close to full compression at close to full lock etc. Plus American Truck said not to.
Pain in the butt guesstimates.
What you did:

LT295/70R18 E 129/126Q	217120	16.4	34.29	11.77

What I'm doing (conservatively):

LT285/60R20 E 125/122Q	217400	16.4	33.70	11.50

What I don't want to risk trying:

LT285/65R20 E 127/124Q	217350	16.4	34.80	11.50

 

[ocwill1]

My plan is 2" rough country puck (rake is currently 2.5") and will be putting on 285/65/20 Firestone Destination XT's on stock wheels.. Most likely will be done in the next couple of weeks... Currently running last years STX polished/black 20's with 275/55/20 Hankooks...

 

[rathbunr5]

Next Saturday I will be installing my “Winter” set up. I’ll be ditching the 20” Sport wheels for the 18” sport wheels wrapped in 295/70/18 Ridge Grapplers. I’ll also be adding the Rough Country 2” Level kit with the rear shock/block kit. Will post pics ASAP

 

[ib_jigged]

My plan is 2" rough country puck (rake is currently 2.5") and will be putting on 285/65/20 Firestone Destination XT's on stock wheels.. Most likely will be done in the next couple of weeks... Currently running last years STX polished/black 20's with 275/55/20 Hankooks...

Please be sure to add photos with the Destination XT's installed! I am leaning towards these as well.

 

[Austinrauh]

Yep, Thanks, all pretty close specs. After following what you did and all the specs, I wanted a little wiggle room for suspension, crash bar, and rear clearance at close to full compression at close to full lock etc. Plus American Truck said not to.
Pain in the butt guesstimates.
What you did:

LT295/70R18 E 129/126Q	217120	16.4	34.29	11.77

What I'm doing (conservatively):

LT285/60R20 E 125/122Q	217400	16.4	33.70	11.50

What I don't want to risk trying:

LT285/65R20 E 127/124Q	217350	16.4	34.80	11.50

So a 285/75r18 (18x9 +18) 2” front level, would require a decent amount of trimming from your specs?

 

[KartRacer25]

So a 285/75r18 (18x9 +18) 2” front level, would require a decent amount of trimming from your specs?

I'd consult a few experts first. I cant figure the arc with the +18. The tire would be about same width as my 285/60R20 but 1.3" taller. Then .5" taller than flynavy tried but .4" narrower. SO maybe evens out.
https://tiresize.com/comparison/
I'll post pics of my clearances for comparison.
BTW these tires are awesome. I love good Hankooks but if anyone still has the OEM tires, take em off and start a dumpster fire tonight.

I have plenty of room to spare 1" in most places.

 

[Austinrauh]

Thanks for the response, it’s really on the edge, I’m curious if that offset would be enough to rub. Maybe I go a little more modest.
would this effect electronics? (Like drive assist) most the stuff in the forum is 50/50

I'd consult a few experts first. I cant figure the arc with the +18. The tire would be about same width as my 285/60R20 but 1.3" taller. Then .5" taller than flynavy tried but .4" narrower. SO maybe evens out.
https://tiresize.com/comparison/
I'll post pics of my clearances for comparison.
BTW these tires are awesome. I love good Hankooks but if anyone still has the OEM tires, take em off and start a dumpster fire tonight.

I have plenty of room to spare 1" in most places.

 

[KartRacer25]

Nitto Ridge Grapplers in 285/60R20, 38psi, stock, 2" rake. Finally !!!

 

[rathbunr5]

Nitto Ridge Grapplers in 285/60R20, 38psi, stock, 2" rake. Finally !!!

This is clean looking truck. I love the stock height with some beefier tires. And i LOVE the supercab look

Sponsored