ECU module programming guide using FDRS

[Fordphanatic]

anyone mind checking mine? 1FTFW1ED8MFB55506

Sponsored

 

["Steve"]

thanks.

 

[Kanuck]

Would someone mind checking my VIN?
1FTFX1E81MKE01710

I want to know what I have for update, so I can pick peoples brains if needed.

I am just waiting for the charger/power supply to be delivered. I have the mongoose plus and software installed on the lap top. Plan is to get a license on Saturday morning and get r done.

 

[Mike G]

Would someone mind checking my VIN?
1FTFX1E81MKE01710

I want to know what I have for update, so I can pick peoples brains if needed.

I am just waiting for the charger/power supply to be delivered. I have the mongoose plus and software installed on the lap top. Plan is to get a license on Saturday morning and get r done.

 

[Kanuck]

Thanks Mike. Itching to get at it. Will do the PCM first and take it from there.

 

[ENG430]

Can any one please check if there are any updates.. Thanks in advance

1FTFW1E51MFC37912

 

[Mike G]

Can any one please check if there are any updates.. Thanks in advance

1FTFW1E51MFC37912

GWM (gateway) module is the only thing showing.

Mike

 

[ENG430]

GWM (gateway) module is the only thing showing.

Mike

Thank you Mike

 

[ZamoJoe]

So this is the list of updates I need on my truck which I am going to take care of in the next couple of days.

Can someone please let me know which top four are most important that should be updated first, and in which order to do them?

The rest I’ll do in any order

TIA

 

[Ford4Ever]

Could someone please run a check on my VIN: 1FTFW1ED5MFB53809
It was fully updated in April but I haven't updated in awhile.

 

[ColoradoHunter]

Could someone please check and see where my F-150 stands as far as updates? Vin is 1FTFW1ED5MFC06184 .

Truck was repaired with CSP 22B08 on 14 June. I received 4 OTA's( up to 2.7.1) and the trailer recall OTA by the 27th. On the 30th I got two failure msg's on Fordpass for OTA 2.7.3. Truck shows 2.7.3 was successful. Am I stuck in place since Ford thinks I'm on 2.7.1 and the truck says 2.7.3? I've had scheduled updates set for every night since the 30th and have had my trickle charger on but have had nothing happen as far as OTA's.

 

[Autofill]

Fully up to date! That was really fun I have to say.
I’m a huge geek when it comes to this stuff so this has been awesome.
Thanks everyone.

 

[Autofill]

Could someone please check and see where my F-150 stands as far as updates? Vin is 1FTFW1ED5MFC06184 .

Truck was repaired with CSP 22B08 on 14 June. I received 4 OTA's( up to 2.7.1) and the trailer recall OTA by the 27th. On the 30th I got two failure msg's on Fordpass for OTA 2.7.3. Truck shows 2.7.3 was successful. Am I stuck in place since Ford thinks I'm on 2.7.1 and the truck says 2.7.3? I've had scheduled updates set for every night since the 30th and have had my trickle charger on but have had nothing happen as far as OTA's.

I can check in a bit after the kids are asleep.

 

[Kanuck]

Thanks Mike. Itching to get at it. Will do the PCM first and take it from there.

I keep getting a screen come up that is FlexNet Connect Client wanting me to down load VCI Software 1.0.1.16. Do I need this? It is 330 meg.

 

[Mike G]

I keep getting a screen come up that is FlexNet Connect Client wanting me to down load VCI Software 1.0.1.16. Do I need this? It is 330 meg.

I have installed it. I have also been told that I didn't need to install it and that my adapter would work fine without it. Another poster also found that he had to install it for his adapter to be recognized by FDRS.

If you have a message saying you need to install it, then I would install it. Worst case scenario, if you don't really need it, it hasn't hurt anything to install it anyway, Best case scenario, if the message was right, you have it installed.

Mike

Sponsored