jeffm4688
Well-known member
- Joined
- Jan 25, 2022
- Threads
- 5
- Messages
- 51
- Reaction score
- 14
- Location
- Central FL
- Vehicles
- 2021 Platinum, 2012 M3
1FTFW1E85MFA30806What is your vin
Sponsored
1FTFW1E85MFA30806What is your vin
I dont see how your paying ford for a fdrs subscription and doing the job for them.Does doing these software updates yourself cause any warranty issues with Ford?
I have my Mongoose adaptor and going down this rabbit hole Friday!I dont see how your paying ford for a fdrs subscription and doing the job for them.
If you read this thread well the first few pages have detailed directions And everything you will need in order to complete your updates. Its all there for us. Good luck and enjoy your truck when your doneI have my Mongoose adaptor and going down this rabbit hole Friday!
All the info is in this thread. You will be fine and enjoying blue cruise when your doneIm starting my updates tomorrow morning as well, My truck has been stuck on 1.7.1 and after 2 trips to the dealership, the last one being 7 days and all they did was kill the battery I've got everything I need to get the updates done and get my Job 1 2021 EAP Limited up to date and hopefully get BlueCruise enabled
188 didnt load. Only half the cluster update loaded. I can side load it. If you have FDRS try a PMI and see if it loads 188 FCA.. Until this gets corrected youll be stuck1FTFW1E85MFA30806
is 21G01 still the go to order for module programming sequence?All the info is in this thread. You will be fine and enjoying blue cruise when your done
Yes I believe that was the release from the manufactureris 21G01 still the go to order for module programming sequence?
Ah thank you. I have to rebuy FDRS in the next day or two and give this a shot, what does PMI stand for?188 didnt load. Only half the cluster update loaded. I can side load it. If you have FDRS try a PMI and see if it loads 188 FCA.. Until this gets corrected youll be stuck
Programmable Module InstallationAh thank you. I have to rebuy FDRS in the next day or two and give this a shot, what does PMI stand for?
thanks, last stupid question, which module is 188? icc? going to pick up FDRS within the hour.Programmable Module Installation
Think of it like re-installing a piece of software on a computer. If the software installed on a PC doesn't work or is corrupt, one of the first things you might try is re-installing the software.
In FDRS, click on the module you want to interact with on the left side of the screen. On the right side of the screen will be several options (they look like the software updates screen). One of them is PMI. When you run it, you'll be asked if the physical module installed is the original. Answer NO. This hopefully will rewrite the software to the module as if it was new.
1FTFW1E85MFA30806
188 didnt load. Only half the cluster update loaded. I can side load it. If you have FDRS try a PMI and see if it loads 188 FCA.. Until this gets corrected youll be stuck
I believe @Jesse-Infotainment is referring to the IPC. Your current software value is not correct.thanks, last stupid question, which module is 188? icc? going to pick up FDRS within the hour.